Will Lippert Manual Pull-Out Step LC432690 Fit StarCraft 14RT Pop Up

Question

Question:

Which triple step is correct? The description for the LC432690 does not match claims. They appear to be Identical to the LC432696. Just trying to figure out which will fit my StarCraft 14RT Pop up. My current fold out two step has the bottom step 12-14foot above the ground depending on the campsite topography.

asked by: Dr. M

0

Expert Reply:

If the mounting bracket width you have is 25.5 inches like you mentioned the # LC432690 that you referenced would be what you'd need. This would match up to that perfectly and would put the lowest step 25 inches from the RV frame.

expert reply by: Jameson C

0

Answer 1

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 2

I may have another option but unfortunately the Brophy Camper Scissor Steps #SS04 you have were not designed to be permanately installed and will not work with the TorkLift GlowStep Stow N' Go Mounting Bracket #TLA7820 you mentioned. The Brophy…

view full answer...

Answer 3

The Brophy Tailgate Scissor Step Mounting Bracket, #TSSB is not confirmed to fit with the TorkLift GlowStep Camper Scissor Steps, #TLA7503-8000. The #TSSB is however designed to work with Brophy manufactured steps of similar dimensions to the…

view full answer...

Answer 4

The closest pull-out steps we currently have available to match the steps you are replacing in your RV is the Lippert Manual Pull-Out Step for RVs #LC432690. This 3 Step product measures 24 inches wide with a 9 inch drop and the overall width of its…

view full answer...

Answer 5

The Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs #AS24 will work well for your Lance 650 Camper as long as the height to your threshold is between 31 and 39 inches. If it is between 24 and 30 inches…

view full answer...

Answer 6

Yes, since the mounting bracket for the TorkLift GlowStep Camper Scissor Steps #TLA7805 can be mounted under your door this will reduce the distance for that last step into your camper. I went out to the warehouse and found that the mounting bracket…

view full answer...

Answer 7

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, #TLA7834 are for an entry height of 31" to 42". The #TLA7845, and #TLA7835 are for entry height of 38-1/2" to 50" the difference between the two being white or…

view full answer...

Answer 8

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have a…

view full answer...

Answer 9

The Brophy Tailgate Scissor Step Mounting Bracket #TSSB is the correct size for your 21" scissor steps. The other Mounting Bracket #AS2002 is only for 24" wide steps.

view full answer...

Answer 10

Since the TorkLift GlowStep Camper Scissor Steps #TLA7803 and TorkLift GlowStep Camper Scissor Steps w/ Landing Gear #TLA7803-8000 you were looking at are designed to be mounted with 6 lag bolts to hold the steps to your bumper, I recommend…

view full answer...

Answer 11

What you're going to want instead is the: -Brophy Tailgate Scissor Step Mounting Bracket #TSSB. This mounting bracket will work with your AS04 scissor steps, as well as the AS02, AS03, AS05, AS23, AS24, AS25, SS02, SS03, and SS04 steps. The…

view full answer...

Answer 12

I believe you are asking if a fuse is needed when installing the Diamond Charging Station #DG61024VP. The Charging Station does not require a dedicated fuse and it's just going to be wired directly to your 12V power source, either to existing…

view full answer...

Will Lippert Manual Pull-Out Step LC432690 Fit StarCraft 14RT Pop Up

Product Page this Question was Asked From

Continue Researching