What are the Different Knobs on a Tekonsha Voyager

Question

Question:

Electronic brake controller I have two turn dial knobs on a brake controller it is a tekonsha voyager What does the Turndale on the left-hand side do?

asked by: Brent

0

Expert Reply:

The Tekonsha Voyager # 39510 has both a Power Knob (right side) and a Level Knob (left side). Whereas the right side is for fine tuning the brakes, the left knob will be for the more basic power level coming out of the controller to the brakes on the trailer. I included an install of this controller for you to take a look as as well.

expert reply by: Lazer S

0

Answer 1

While I was unable to confirm the exact dimensions of the Norcold 1200LRIM, I think your current refrigerator to be 63-1/4 inches tall, 32-11/16 inches wide, and 24 inches deep. Please confirm this. The Everchill RV refrigerator with freezer drawer…

view full answer...

Answer 2

It looks like you need to replace the support arm of your 2017 Jayco SLX Carefreee awning. The arms are replaceable With Solera Classic Universal Awning support arms like part #LC434720 that replace the arms from 81" to 96" long. To replace…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey David! The B&W Turnoverball #BW73FR does allow the installation of a 5th wheel hitch as well. That is one of the best things about this system. You will need the B&W Companion #BWRVK3500-5W or #BWRVK3400-5W (slider). Both install using…

view full answer...

What are the Different Knobs on a Tekonsha Voyager

Featured Help Information

Miscellaneous Media

Continue Researching