Does Curt Front Hitch # C31086 Fit 2018 Jeep Wrangler JL Rubicon with Winch

Question

Question:

will it fit with 2018 Rubicon JL that has a factory winch on it?

asked by: Tom L

0

Expert Reply:

Curt has confirmed for us that the front hitch part # C31086 that you referenced fits all models of the 2018 Jeep JL Wrangler including the Rubicon that has the factory winch.

expert reply by: Jameson C

0

Answer 1

The SaltDogg Electric Hitch-Mount Salt Spreader for 2" Hitch - Gravity Feed w Auger #337TGSUVPROA and the SaltDogg Electric Hitch-Mount Salt Spreader for 1-1/4" or 2" Hitch #337TGSUV1B have a few differences. The #337TGSUVPROA has a…

view full answer...

Answer 2

Hi Martin! We do indeed have a front mount hitch for your 2022 Jeep Wrangler Unlimited Rubicon edition. For that, you will want the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31086. This is mostly a bolt on application, but…

view full answer...

Answer 3

Hey Bob, thanks for reaching out. The steel skid plate is tricky. It is possible to modify the plastic skid plate to accommodate the front hitch. Cutting the metal skid plate would be way trickier though. For this reason, front hitch manufacturers…

view full answer...

Answer 4

To add a front mounted hitch to your 2023 Jeep Gladiator. You will want the Draw-Tite Front Mount Trailer Hitch item #65079. This hitch is custom fit and bolts to your Jeep with included hardware. This hitch will not fit the Rubicon and Mojave…

view full answer...

Answer 5

No, it does not but I have one that does. For your 2023 Jeep Wrangler Rubicon you will want the Draw-Tite Front Mount Trailer Hitch item #65079. This front hitch is custom fit and bolts to your Jeep with included hardware. The Draw-Tite Front Mount…

view full answer...

Answer 6

I reached out both to Curt and Draw-Tite about the installation of their front mount hitches, parts #C31086 and #65079 respectively, on your 2018 Jeep Wrangler Rubicon and I pretty much got the same answer from both of them. The plastic pieces are…

view full answer...

Answer 7

You can install the Curt front hitch #C31086 on your 2021 Jeep Wrangler Rubicon but you will have to modify the heat shield like you mentioned. The Draw Tite part #65079 is also a fit and requires less modification though so it would be what I would…

view full answer...

Answer 8

As long as you have the factory front bumper on your 2018 Jeep Wrangler Unlimited Rubicon, the Draw-Tite Front Mount Trailer Hitch Receiver #65079 is a confirmed fit. I've attached the installation details for you. It does not require any…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Does Curt Front Hitch # C31086 Fit 2018 Jeep Wrangler JL Rubicon with Winch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching