7-Way Trailer Connector Recommended for 2016 Chevy Traverse

Updated 03/20/2021 | Published 03/19/2021

Products Featured in This Question

Mounting Bracket for 7-Way

(530)

$10.71

T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector

(183)

$62.91

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(465)

$31.77

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(288)

$182.21

No-Drill Mount for Electrical Mounting Bracket - Short

(1181)

$22.65

Mounting Bracket 4-Pole Flat

(6123)

$9.85

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM

(162)

$17.02

Mighty Cord Universal 7-Way Mounting Bracket

(164)

$8.55

Pollak 7 Pole to 4 Way Connector Adapter

(1038)

$8.19

Tekonsha Primus IQ Trailer Brake Controller - Up to 3 Axles - Proportional

(2159)

$90.04

Question:

Good afternoon, I have a 2016 Chevy traverse without the factory tow package. I am looking for the correct wiring to be able to tow my camper. I ideally would like the 7 and 4 pins available. I look up inside the rear vendor and there is a plug there. Any help would be greatly appreciated. Thank you

asked by: John W

Expert Reply:

I'd be happy to help you with that. Even though you don't have the 'factory tow package', your vehicle is already prewired for a 7-way and a brake controller, if you need one. For the 7-way, you can use part # 118271 that will plug into the connector under the bumper. The kit includes the fuses and relays needed to activate the tow package.

For a 4 pin connector, you can either use an adapter like # PK12716, or you can use a t-connector like # 118384 that would plug into the connection between the harness and the 7-way socket provided by the # 118271. To attach the 7-way to the hitch crossbar, you'll need a # A10-9394VP bracket and a # 18140 standoff bracket. To mount the 4 pin collector, you can use the # 18144 bracket and another # 18140 standoff bracket.

If the camper has brakes, you'll need a brake controller to actuate them. The Tekonsha Primus, part # TK90160 is an inexpensive brake controller that would work well for you. You'd also need the # 3026-P brake controller wring harness which would install as shown in the linked video.

Finally, if you don't already have a trailer hitch, I'd recommend the Curt Class III hitch, part # 13424. I'll link to an install video for you.