Axle Riser Kit - Single Diamond Torsion Axle & RPod RP193

Question

Question:

Hey, We were wondering if the axle riser kit Item # LC270682 would fit an RPod RP193. Thanks!

asked by: J. A

0

Expert Reply:

This kit is designed for use on trailers with Lippert single, diamond torsion axle with a maximum 3,500-lb capacity. You do not identify what axle you have but from information available to me most Rpods have been produced with this axle, please verify. Compatible with side-mount or top-mount torsion axle mounting brackets and includes 2 axle riser channels and mounting hardware.

expert reply by: Michael R

0

Answer 1

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 2

The brackets the fit tip for the #K71-725-02 is referring to is the bracket the axle fits into. I attached a picture that shows the bracket they are talking about.

view full answer...

Answer 3

We do have a selection of trailer axles that feature an 89 inch hub face measurement but none that also have a 62 inch spring seat length. We do not manufacture the axles so your best bet to obtain a standard replacement with matching dimensions will…

view full answer...

Answer 4

Yes the Lippert Components Axle Riser Kit for Single Diamond Torsion Axle part #LC270682 has been confirmed to work on several R-Pod campers. The one thing to ensure is that the axle is the Diamond type. Meaning the torsion axle looks like a diamond…

view full answer...

Answer 5

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…

view full answer...

Answer 6

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

view full answer...

Answer 7

Due to the orientation of your axle, I believe you have a Lippert Diamond Torsion Axle. If your axle label confirms this, you'll want to use the Lippert axle riser kit, part #LC270682 which provides a 3-1/2 inch lift and is our only diamond axle…

view full answer...

Answer 8

I went out into the warehouse to measure the Lift Kit #K71-725-02 for you. The holes measure 9 inches on center and 9-1/2 inches on center. I've attached a photo to assist.

view full answer...

Answer 9

Hey Marty, thanks for reaching out! You'll likely be installing the Lippert 3-1/2" Axle Riser Kit #LC382741 on your 2020 R-Pod 196 but you'll need to confirm that your R-Pod is equipped with a square torsion axle rated for 3,500 lbs and…

view full answer...

Answer 10

Hey Mark. The Torflex Lift Kit #DX56CR is specifically for Dexter #11 Torflex axles and would not be compatible with your Lippert Axle. I'm pretty sure at this point Lippert dropped all of their lift kits for torsion axles but if you can send me…

view full answer...

Answer 11

The 2017 Forest River R-Pod could use either the Axle Riser Kit - Single Diamond Torsion Axle part #LC270682 or Axle Riser Kit - Single Square Torsion Axle part #LC382741. It all comes down to what was installed at the factory which could have been…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Axle Riser Kit - Single Diamond Torsion Axle & RPod RP193

Featured Help Information

Miscellaneous Media

Continue Researching