Recommended Trailer Hitch Receiver For 2020 Chevrolet Silverado 1500

Question

Question:

Do you have a version of the below product for a 2020 Silverado 1500? They build these with a cross member connected to the frame but no receiver. Just like the one in the dodge in your pictures. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 Item # e98852

asked by: Robert V

0

Expert Reply:

I have another option for you, but at this time (2/22/2021) there is not a trailer hitch receiver like the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98852 that bolts to a crossmember that is confirmed to fit your 2020 Chevrolet Silverado 1500.

Instead I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13393 if your Silverado does not have a factory trailer hitch receiver, or the # C15307 if you have a factory trailer hitch receiver.

In our experience the Curt Trailer Hitches have a tougher powder coat finish that holds up better to scratches and will keep your trailer hitch receiver looking new for years to come.

You may also be interested in the etrailer Ball Mount Kit # 989900 which includes two ball mounts, two hitch balls, two hitch pins and clips, and a carrying case to complete your towing setup.

I included videos of the # C13393 and # 989900 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

A hitch will always have an ID sticker on it listing its capacities for standard towing and towing when used with weight distribution, even an OEM hitch should have this information on it somewhere, perhaps on the back of the hitch crossbar. The…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...

Recommended Trailer Hitch Receiver For 2020 Chevrolet Silverado 1500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching