Recommended Weight Distribution Shank for Low Ground Clearance
Updated 02/03/2021 | Published 01/31/2021
Question:
Help, I have a sway bar and weight distribution hitch. My problem is my shank is a down, its to low for 2021 Tacoma. I need a straight shanks that can accommodate the sway bar and weight connections. The bracket is good just the shank is to low. Thanks
asked by: Thomas B
Expert Reply:
It sounds like you're looking for a new weight distribution shank with less drop and if that's the case we have tons of great options. In order to see how much drop/rise you need you can measure from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler while level. I have attached a full list of our options below. The Curt Adjustable Weight Distribution Shank part # C17100 for example only offers a 2" (trunnion)/3" (round) drop.
Product Page this Question was Asked From
Curt Adjustable Weight Distribution Shank - 8"
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 7 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: shank
- Q&A: Distance From Top of Curt Shank to Center of Topmost Adjustment Hole
- Video: Review of Xtreme Heaters RV Heaters - Small Boat RV Heater 400W - XH54FR
- Video: Breaking Down the Curt Adjustable Weight Distribution Shank
- Shop: Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Search Results: husky shank
- Search Results: accessories and parts
- Search Results: weight distribution hitch
- Search Results: fastway
- Search Results: equalizer hitch
- Search Results: equalizer shank
- Q&A: Troubleshooting Height Adjustment for Reese Weight Distribution System
- Q&A: Recommended 7 Hole 2" Shank for a Weight Distribution System
- Q&A: Recommended Replacement Weight Distribution Shank for Curt TruTrack System
- Q&A: Will the Curt Adjustable Weight Distribution Shank Accept 3/4 Inch Diameter Bolts
- Q&A: Recommended Weight Distribution System with 5 Inch Rise for 2007 Toyota Sienna
- Q&A: Will Curt Weight Distribution Shank Work in Place of Equal-i-zer Shank for 2 Inch Receiver
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 10K
- Shop: Blue Ox TrackPro Weight Distribution Shank for 2" Hitches - 7 Hole Adjustment
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 7 Hole Adjustment
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW