Recommended Weight Distribution System with 5 Inch Rise for 2007 Toyota Sienna
Updated 02/13/2018 | Published 02/12/2018
Question:
I have a 2007 Toyota Sienna. Do you have a weight distribution that has about 5 inch rise in height?
asked by: David
Expert Reply:
For your weight distribution system, the rise is due to the shank itself. Most weight distribution shanks are able to be interchanged between manufacturers. For your application, I recommend the Curt Adjustable Weight Distribution Shank - 8" # C17100. This will give you up to a 6-1/2 inch rise using trunnion bars or up to a 7-1/2 inch rise using round bars. You will simply invert the shank to give you the height needed.
To give you the correct system for your application, I need to know your trailer loaded tongue weight or your GVWR on your trailer. If you'd like a recommendation, let me know that info and I'd be happy to assist.
Product Page this Question was Asked From
Curt Adjustable Weight Distribution Shank - 8"
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 7 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Continue Researching
- Search Results: shank
- Q&A: Distance From Top of Curt Shank to Center of Topmost Adjustment Hole
- Video: Review of Xtreme Heaters RV Heaters - Small Boat RV Heater 400W - XH54FR
- Video: Breaking Down the Curt Adjustable Weight Distribution Shank
- Shop: Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Search Results: husky shank
- Search Results: weight distribution hitch
- Search Results: equalizer shank
- Search Results: weight distribution shank
- Search Results: accessories and parts
- Search Results: equalizer hitch
- Q&A: Recommended Replacement Weight Distribution Shank for Curt TruTrack System
- Q&A: Will the Curt Adjustable Weight Distribution Shank Accept 3/4 Inch Diameter Bolts
- Q&A: Troubleshooting Height Adjustment for Reese Weight Distribution System
- Q&A: Recommended 7 Hole 2" Shank for a Weight Distribution System
- Q&A: Recommended Weight Distribution Shank for Low Ground Clearance
- Q&A: Is Curt Weight Distribution Shank #17100 Compatible with Fastway Weight Distribution
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 10K
- Shop: Blue Ox TrackPro Weight Distribution Shank for 2" Hitches - 7 Hole Adjustment
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 7 Hole Adjustment
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW