Weight Distribution Recommendation for 2017 Apex Nano with 400 lb Tongue Weight
Updated 12/22/2025 | Published 10/07/2024
Question:
I need help choosing a weight distribution hitch. I have a 2017 F150 with active rear suspension already installed. Were buying a 2017 Apex Nano with a tongue weight of 406 pounds. Is there any other relevant information you would need to make a recommendation? On a good, better, best scale, were looking for better or best. Thank you for your help!
asked by: Cody
Expert Reply:
Hey Cody, you got me all the info I needed so lets start with a good WD system for your 406 lbs of tongue weight. For that the Reese Round Bar part # RE34FR would work if you wanted a great value that gets the job done.
Next up I would go with the Fastway e2 part # FA92-00-0600 which is a trunnion bar setup with better ground clearance and has two points of sway control to help with passing semis.
Finally the gold standard is the Equal-i-zer part # EQ90-00-0600 which has a 4 point sway control system and the reputation as being the best overall WD on the market. If you wanted the confidence knowing you have the best of the best this would be the way to go.
Continue Researching
- Search Results: shank
- Q&A: Distance From Top of Curt Shank to Center of Topmost Adjustment Hole
- Video: Review of Xtreme Heaters RV Heaters - Small Boat RV Heater 400W - XH54FR
- Video: Breaking Down the Curt Adjustable Weight Distribution Shank
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Q&A: Recommended Weight Distribution System with 5 Inch Rise for 2007 Toyota Sienna
- Q&A: Recommended 7 Hole 2" Shank for a Weight Distribution System
- Q&A: Recommended Weight Distribution Shank for Low Ground Clearance
- Q&A: Will the Curt Adjustable Weight Distribution Shank Accept 3/4 Inch Diameter Bolts
- Q&A: Will Curt Weight Distribution Shank Work in Place of Equal-i-zer Shank for 2 Inch Receiver
- Q&A: Is Curt Weight Distribution Shank #17100 Compatible with Fastway Weight Distribution
- Search Results: equalizer hitch
- Search Results: fastway
- Search Results: weight distribution hitch
- Search Results: weight distribution shank
- Search Results: equalizer shank
- Search Results: accessories and parts
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 7" Rise, 3" Drop - 400 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 7.5K GTW, 750 lbs TW
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Video: How to Choose a Trailer Brake Controller
on Weight Distribution Hitch
Jameson C.
12/22/2025
Hey Cody, how did things turn out with the weight distribution hitch for your F150 and Apex Nano? Did one of the options like the Fastway e2 or Equal-i-zer give you the ride quality you wanted? Your update could make it easier for others towing similar setups.