Height Of Timbren Suspension Enhancement System TFR150RB For 2019 Ford Raptor

Question

Question:

I need to the height measurement of the timbern kit for the 2019 Ford Raptor Thanks

asked by: Matt C

0

Expert Reply:

I had our warehouse measure the Timbren Suspension Enhancement System # TFR150RB for your 2019 Ford Raptor, and it has an overall height of 5-9/16" as shown in the included diagram. The mounting bracket measures 1-1/8" tall, the spacer is 1/2" tall, and the spring is 3/15/16" tall.

I included a video of the # TFR150RB for you to take a look at.

expert reply by: Samuel C

0

click to enlarge

Answer 1

Yes we have the Timbren kit part #TABSFR150RB which is a confirmed fit for the rear suspension of your 2022 Ford F-150 Raptor. This can provide up to an additional 2,000 lbs of suspension support as well.

view full answer...

Answer 2

You are dead on. The only difference between the Timbren Active Off-Road Bumpstops - Rear Suspension - 2,000 lbs #TABSFR150RB and the 2400lb #TFR150RB for your 2018 Ford F-150 Raptor is the load rating. The correct system will come down to what you…

view full answer...

Answer 3

The Timbren Suspension Enhancement System - Rear Axle #TFR150RB will provide great load support but it may feel a little jolt when you hit a bump or pothole. There is not a airbag system for your truck presently, so I recommend instead using the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Height Of Timbren Suspension Enhancement System TFR150RB For 2019 Ford Raptor

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching