Replacement Brake Pads for Titan 13" Disc Brake Assembly

Question

Question:

What replacement brake pads do you sell for these brakes?

asked by: Mark E

0

Expert Reply:

I was able to get the Replacement Brake Pads for Titan 13" Disc Brake Assembly part # DX65FR added to our site for you so they are now available to purchase. These will be a direct replacement for the Titan Disc Brake Assembly part # THRCM13378DACEK.

expert reply by: Conner L

0

Answer 1

We do not have a Kodiak disc brake caliper cross reference to automotive calipers but for the brake pads there are cross referenced parts. If you refer to the linked image you'll see a partial list of cross-compatibility of brake shoes for GM…

view full answer...

Answer 2

The appropriate replacement brake pads for the Kodiak Disc Brake Kit #K2HR79E with the Kodiak 250 calipers are the Kodiak Ceramic Brake Pads for 7000-lb brakes #K250CP , which are designed for the 13" rotors in the #K2HR79E kit. There is also a…

view full answer...

Answer 3

So the part number MKD289 is an automotive application for brake pads. If that's the style you need the correct replacement is the #K225CP which is the match. I attached a chart that has some other interesting info for picking out replacement…

view full answer...

Answer 4

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

view full answer...

Answer 5

You will need three of the Kodiak Disc Brake Kit for 8k Dexter axles #K2HR858A. This an oil based lube system so you will need the bearing kit and seals #DBRKHW850 designed for it. We recommend oil base systems for triple axles because of the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Brake Pads for Titan 13" Disc Brake Assembly

Product Page this Question was Asked From

Continue Researching