Which B and W Biker Bar Fits Harley Davidson Softail and Touring Model

Question

Question:

which biker bar would fit both touring and softail

asked by: Alan M

0

Expert Reply:

For the Harley Softail the correct B and W Biker Bar is the part # BWMC2302 then for a Touring model you'd want the part # BWMC2301. There isn't a single model that fits both due to differences between the bikes.

expert reply by: Jameson C

0

Answer 1

If the screen door is not close to closing you need to trim the bottom of the screen door frame which I have also had to do. To do this, with the steps down, take tape and place a piece on each side, down on the threshold, at the edge of the step…

view full answer...

Answer 2

Hi Jerry; the biker bars you have for the Touring won't fit the Softail. You can either get an additional Biker Bar #BWMC2302 designed for the Softail or you can swap out the bar on one of the ones you have now with #BWMC2302B.

view full answer...

Answer 3

The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson #BWMC2301 fits the Street Glide models like your 2022.

view full answer...

Answer 4

Yes, the B&W Biker Bar Tie-Down System Base with Anchor Plates, #BWMC2300, can be mounted and used on an open trailer. The base plate's dimensions are 25 inches long x 6-3/4 inches wide. This product is not the complete Biker Bar unit. The…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Which B and W Biker Bar Fits Harley Davidson Softail and Touring Model

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching