Can I Use a Slip On Disc Brake Rotor with the 7000-lbs Trailer Idler Hub Assembly
Updated 12/13/2020 | Published 12/10/2020
Products Featured in This Question
Question:
Can disc brake slip on rotor be installed on this hub? Thanks
asked by: Den
Expert Reply:
Yes. As long as your disc brake rotor has an 8 on 6-1/2 bolt pattern then you can use the Trailer Idler Hub Assembly for 7,000-lb E-Z Lube Axles - 8 on 6-1/2 # AKIHUB-865-7-1-EZ-K without any issues. A good disc brake kit to use with this hub would be the Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Stainless Steel - 1/2" Bolts - 7,000 lbs # K2R712S.
I've linked our entire selection of disc brake kits with slip on rotors for you to have a look at, as well as some review videos of these parts.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 7K Axles - 8 on 6-1/2
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU37FR
- Shop: Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Stainless Steel - 1/2" Bolts - 7,000 lbs
- Video: Checking Out the Kodiak Disc Brake Kit
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 7,000-lb Axles
- Video: Checking Out the Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb Axles
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs
- Shop: DeeMaxx Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Maxx Coat/Stainless - 9/16" Bolts - 7K
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet and Stainless - 7,000 lbs
- Q&A: Replacement Master Cylinder for Titan 60ZX7000 Drum Brake Actuator
- Shop: DeeMaxx Trailer Idler Hub for 7,000-lb Axles - 8 on 6-1/2 - Galvanized
- Q&A: Recommended Disc Brake Conversion Kit for a 2019 Grand Design Solitude 373FB
- Search Results: trailer suspension parts
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 and Aero 7500 Brake Actuators - Drum
- Video: Review of Dexter Trailer Hubs and Drums - Hub and Drum - DX62KR
- Video: Trailer Hub for 5,200-lb to 7,000-lb Axles Spec Review
- Search Results: 10 x 1~1/2 inch drum trailer brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Can Brakes be Installed on Only One of the Axles of a Tandem Axle Trailer
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Are LED Trailer lights More Durable than Incandescent Light Bulbs
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Q&A: What Direction Should Disc Brake Calipers Face
- Search Results: rotor hub 133 8 10
- Search Results: 9/16 stud
- Search Results: rotor
- Search Results: wheel stud
- Article: Adding Electric Over Hydraulic Disc Brakes