Kit for Cleaning and Protecting Motorhome

Question

Question:

What are the best products for cleaning and protecting the exterior of the motorhome

asked by: Allen

0

Expert Reply:

We have the Complete RV Cleaner Kit # BE57VR which comes with everything needed to efficiently clean your RV as well as protect it. It comes with a bug remover, a black streak remover, a carpet cleaner, awning cleaner, and a wash and wax kit plus a microfiber mit.

expert reply by: Jameson C

0

Answer 1

Hi Michael, that’s a really smart question, and I’m glad you asked before trying it. Those Ark corner steadies part #ARK94FR aren’t meant to level a motorhome, especially not a 33 foot Class A. They’re designed to stabilize after you’re already…

view full answer...

Answer 2

Yes, Jeff, your 2024 Tacoma TRD is a great match, as is any vehicle with a 7 way connector on the back. You’ll just want to use the Redarc #RED57AR and you won't need anything else. It connects in front of the 7 way outlet on your vehicle, then…

view full answer...

Answer 3

Hey Ron! If you keep your trailer parked on dirt/grass for a prolonged period of time it can damage the tires. The ground tends to have moisture which can be absorbed by the tires leading to dry rot. More than likely you will also be on uneven ground…

view full answer...

Answer 4

The best way to ensure the graphics on your new trailer stay crisp and sharp is to make sure you always have a good coat of wax on the trailer. This coat of wax is going to act as a protectant which will shield the graphics/decals whether they be…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Kit for Cleaning and Protecting Motorhome

Product Page this Question was Asked From

Continue Researching