Is There An Anti-Rattle Device Compatible with the B&W Tow & Stow Ball Mounts

Question

Question:

Do you know if they make a hitch stabilizer for a tow and stow hitch for a 2019 gmc 1500 with the multifunction tailgate? If so let me know which one

asked by: Randall C

1

Helpful Expert Reply:

The B&W Tow & Stow Ball Mounts like part # BW44FR have a solid shank so the only type of anti-rattle options available are the collar type like the Roadmaster Quiet Hitch part # RM-061.

expert reply by: Conner L

1

Answer 1

Yes the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches -part #e99007 will work out great with the B&W ball mounts like the B&W Tow & Stow 2-Ball Mount part #BWTS10037B.

view full answer...

Answer 2

We do have a potential option for you, but the Curt Anti-Rattle Hitch Clamp #C87UR is likely not going to work with your setup. I think you are exactly right in that there is really no room between the receiver and the hitch. So there is really…

view full answer...

Answer 3

The Gen-Y Iron Grip Anti-Rattle Hitch Pin item #GY39FR will work out great with the B&W Tow & Stow item #BW29FR you were looking at. This can be used with any 2" ball mount or accessory. This is the only anti-rattle device we have that…

view full answer...

Answer 4

Hey Hadiya! No, the Curt E16 5th Wheel Hitch w/ S20 Slider for Ram #C85PV will not give you enough clearance to maneuver the Layton Skyline 5th wheel with your 2021 Ram 1500 with a 5-1/2' bed. This unit only moves you 12" back from the…

view full answer...

Answer 5

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 6

Sergio, yes, the PullRite SuperGlide part #PUL63RR will work with your MORryde cushioned pin box like part #MR55QR. you will just need to pair it with the PullRite SuperGlide Quick Connect Capture Plate part #PUL76RR for the setup to function…

view full answer...

Answer 7

Hey Jim, the Kodiak Disc Brake Caliper #KDBC225DAC is designed so that it can be used on either side of a trailer axle so there isn't a specific left and right. This also can be used to replace a Reliable CR1000 and CL1000 so it will work for you…

view full answer...

Answer 8

Hi Chis yes, the PullRite SuperGlide #PUL93RR will work with your 2024 Ford F-250 short bed. This hitch will work with any industry standard rails, so as long as you have a set of those you'll be good to go. If you don't have any rails, then…

view full answer...

Answer 9

Hey Jerry, thanks for reaching out! I recommend picking up the PullRite SuperGlide #PUL63RR and pairing it with the PullRite Base Rail Kit #PUL77RR. This kit comes with custom brackets so you aren't drilling into your truck frame, and the hitch…

view full answer...

Answer 10

I took a look at the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 that you mentioned and it's actually going to be a fit for the Lippert 1621 and 1621 HD 5th-wheel pin boxes, and not your Leand 7920, however I do have another…

view full answer...

Answer 11

I have a solution to help with the chucking that you are experiencing as there is not a Reese Goosebox that fits the same bolt pattern used by the Leland 7920 Pinbox. The bolt hole spacing on your pin box is different vertically and horizontal from…

view full answer...

Answer 12

Hey Jay, the correct replacement converter to replace what you have now that is compatible with LifePO4 batteries would be the part #PD69RR that you referenced. Progressive Dynamics likes to change their part numbers a lot and create revisions of…

view full answer...

Is There An Anti-Rattle Device Compatible with the B&W Tow & Stow Ball Mounts

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching