Anti-Rattle Recommendation for the B&W Tow and Stow Ball Mount

Question

Question:

Will this device work with BandW stowaway hitch

asked by: Lynn C

0

Expert Reply:

Yes the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches -part # e99007 will work out great with the B&W ball mounts like the B&W Tow & Stow 2-Ball Mount part # BWTS10037B.

expert reply by: Randy B

0

Answer 1

We do have a potential option for you, but the Curt Anti-Rattle Hitch Clamp #C87UR is likely not going to work with your setup. I think you are exactly right in that there is really no room between the receiver and the hitch. So there is really…

view full answer...

Answer 2

The B&W Tow & Stow Ball Mounts like part #BW44FR have a solid shank so the only type of anti-rattle options available are the collar type like the Roadmaster Quiet Hitch part #RM-061.

view full answer...

Answer 3

The correct product to use to support the boards you plan on using to support the bed would be the E-Track Wood Beam Socket #59149. Since you will want to have the 2 by 4s on edge to support the plywood, and the only way the #59149 could be installed…

view full answer...

Answer 4

The Gen-Y Iron Grip Anti-Rattle Hitch Pin item #GY39FR will work out great with the B&W Tow & Stow item #BW29FR you were looking at. This can be used with any 2" ball mount or accessory. This is the only anti-rattle device we have that…

view full answer...

Answer 5

Hey Hani, yes the etrailer anti-rattle device part #e38FV would work in the hitch of a 2025 Ford F-150 with a B and W Tow and Stow ball mount.

view full answer...

Answer 6

Out of those two options, I recommend the 3" Drop B&W Tow & Stow 3-Ball Mount item #BWTS10047B for your 2019 Ford F-150. Both the 3" B&W Tow and Stow item #BWTS10047B and the 5" B&W Tow and Stow item #BWTS10048B are…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299 feature air springs that can be adjusted from 5 psi to 100 psi. There isn't a specific inflation level that is recommend for your 13,000 pound 5th Wheel Trailer because it will…

view full answer...

Answer 9

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

view full answer...

Answer 10

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and the…

view full answer...

Answer 11

The wire colors/functions of the Furrion side marker lights #FCE48TASL are as follows: Red: V+ Camera - This is your 12v power for the camera and would need to be connected to the 12v power wire ran from your junction box to the light. Black: Ground…

view full answer...

Answer 12

What you can do is get some foam from a craft store and make a gasket for each of the lights #MCL31AB and #MCL31RB. Or you can use silicon sealant such as #0160297 or gasket maker such as #LT37464.

view full answer...

Anti-Rattle Recommendation for the B&W Tow and Stow Ball Mount

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching