Replacement Hardware For Reese Multifit Hitch

Question

Question:

Im looking for a nut and bolt kit for a Reese multi-fit #37042, can you help me?

asked by: Don T

0

Expert Reply:

The Replacement Hardware Kit for Trailer Hitches # RHK will give you all the hardware you need for that trailer hitch receiver. You just select Reese from the drop down and type the part number in the other box. This ensures you will get the complete hardware kit that came originally with the hitch receiver.

expert reply by: Jason S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 7

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Answer 8

Hello Shuntaro; it sounds like the weld nuts in the vehicle frame likely have some dirt, rust, or undercoating buildup in them, which is pretty common. We recommend cleaning the threads with a wire brush and using a thread chaser if needed before…

view full answer...

Answer 9

The bolts included with the Draw-Tite Class III #75471 Hitch are Class 10.9. They're 10mm in diameter, 30mm long and have a 1.25 thread pitch. If you're needing replacement installation hardware, we can supply a replacement hardware kit for…

view full answer...

Answer 10

Hi Armani! The TowSmart Trailer Hitch Receiver - Custom Fit - Class III - 2" #TS96VR for your 2022 Hyundai Tucson is manufactured right here in America. It also has a limited lifetime warranty and can handle up to 4,500 pounds and 675 pounds of…

view full answer...

Answer 11

Hey Tim, thanks for reaching out! The .75" sag you're seeing is acceptable, that will not have much of an effect on drive quality at all. If you'd like to totally level out your ride, then add the Air Lift LoadLifter 5000 Ultimate Air…

view full answer...

Answer 12

Yes, the conical tooth washer needs to be positioned so that the teeth face the hitch. That is what prevents it from coming loose. Take a look at the video I have linked. At about the 1:50 mark the installers start to put the hardware on to mount the…

view full answer...

Replacement Hardware For Reese Multifit Hitch

Product Page this Question was Asked From

Continue Researching