What Size and Type of Regular to Connect 100-lb Tank to Martin Direct Vent Propane Heater

Updated 11/09/2020 | Published 11/06/2020

Products Featured in This Question

MB Sturgis Single Stage Propane Regulator

(141)

$36.53

Propane Hose with Back Check - Type 1 x 1/4" Male NPT - 20"

(191)

$32.93

Question:

I have a Martin direct vent propane heater what size and type of regulator should I use with a 100lb tank?

asked by: Bruce K

Expert Reply:

According to the installation manual for the Marvin Direct Vent Propane Heaters, the minimum permissible propane gas pressure is 11" WC (water column), which our MB Sturgis Single Stage Regulator # 108072 can supply.

If you are connecting the heater directly to your 100-lb tank, then you will also want a pigtail hose # 37207-30865, to go from the tank valve to the regulator and a supply hose with a 1/4" male NPT fitting to connect at the regulator and a 3/8 female NPT fitting to connect to the heater inlet long enough to reach your heater.

expert reply by: John H