Towing Mirrors Recommendation for 2019 GMC Sierra 1500

Question

Question:

What is the best towing mirror for the GMC Sierra 1500 that does not vibrate?

asked by: John A

0

Expert Reply:

For your 2019 GMC Sierra 1500 the towing mirrors I recommend are the Longview Mirrors part # LO54FR that you referenced as they are very stable (no vibrations), install easily, and allow the full functions of your current mirror to still work like turn signal, puddle lights etc. I attached an install video for these for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

view full answer...

Answer 2

I do have a solution, but the #CIP38MR do not have cutouts to accommodate the lights and cameras on your factory mirrors. Instead, I recommend the K-Source Snap & Zap Custom Towing Mirrors #KS80930. These feature a snap on installation and have…

view full answer...

Answer 3

The Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #LO54FR are designed to keep the blinker, camera and puddle light clear from obstructions and still usable; I've linked a really great video we did that shows these on a…

view full answer...

Answer 4

The Longview Custom Towing Mirrors #LO54FR have a small cutout to fit around the built-in cameras on the mirror of your 2020 GMC Sierra 1500 and wouldn't interfere with the view.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...