Is a 2 inch and a 2-5/16 Ball Included with the Curt Two-Ball Mount

Question

Question:

Are the 2inch and 2 - 5/16inch balls included?

asked by: Blake

0

Expert Reply:

Yes, a 2 inch and a 2-5/16 inch ball is included with the Curt Two Ball Mount # C45002.

expert reply by: Jameson C

0

Answer 1

I do have an option for you but we don't have any 2" ball mounts with a 1" drop exactly, that said the vehicle will likely sag a bit once coupled to the trailer so a 2" drop ball mount should work great to keep the trailer level. I…

view full answer...

Answer 2

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 3

Tire designations ST205/75D14 and ST205/75R14 are both for special trailer tires with a 205mm width, 75-percent aspect ratio and that fit a 14-inch wheel. The difference between them is the tire's type of construction. The ST205/75D14 tire is a…

view full answer...

Answer 4

I applaud your creativity and that'll work but we can simplify it for you as well. Since you have only 1/8" drop you can just use a ball mount with no drop (or rise) so you don't have to put together multiple parts: - Curt Hollow Shank…

view full answer...

Answer 5

The mounting holes of the etrailer.com trailer coupler are spaced 3-1/16 inches apart on center. The holes themselves are a 1/2 inch in diameter.

view full answer...

Answer 6

Yes, the mounting holes for the Channel Tongue Trailer Coupler #CT-5003-Z measure 1" from the center down to the bottom of the channel.

view full answer...

Answer 7

To mount the Channel Tongue Trailer Coupler - Trigger Latch - Bolt On #CT-5003-Z, I recommend using 1/2 inch bolts. The higher the grade, the stronger the bolt. I've attached the review video to help as you plan this installation.

view full answer...

Answer 8

Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…

view full answer...

Is a 2 inch and a 2-5/16 Ball Included with the Curt Two-Ball Mount

Product Page this Question was Asked From

Continue Researching