How To Confirm Fit of the Extreme Off-Road Swing-Up Trailer Jack

Question

Question:

Can I get a copy of the mounting plate so I can see if this jack fits my trailer?

asked by: Robert F

0

Expert Reply:

The Extreme Off-Road Swing-Up Trailer Jack part # ORJW750BD will fit any trailer with a tongue ranging from 3" to 6" tall. The width does not matter as longer bolts can always be used to accommodate different needs. That said, I don't have any sort of copy to provide you with but so long as you go by the above you will not be lead down the wrong path.

expert reply by: Conner L

0

Answer 1

A replacement for your Shelby 5138 is the Fulton Fas-Lok Coupler, 2" Ball, 3" Channel - 3,500 lbs #F223000301. This is a great quality coupler that is cost effective as you referenced. I've attached a review video of this product to…

view full answer...

Answer 2

The Kodiak Disc Brake Kit #K2HR10A11RERR is actually specifically designed to fit an AL-KO 10k #99 spindle, so this will be a perfect replacement. Though this does include the oil cap, it should be noted that it does not include the bearings or seal.…

view full answer...

Answer 3

Hi Brett! Good question. Took me a minute to figure it out, but the Ark Xtreme Off-Road Tube Mount Swivel Trailer Jack- Sidewind - 18" Lift - Black - 1,650 lbs #ARK47FR can actually be taken completely off the tube mount (see included image) and…

view full answer...

Answer 4

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

view full answer...

Answer 5

Hey Justin, welcome back! I can help with that. For the Ark Jacks #ORJW750BD and #ORJW750D, the only difference between the two is the color. The BD is black and the D is silver. Aside from the finish they are the same 1,650 lb capacity 18" lift…

view full answer...

Answer 6

I have attached two diagrams below with the dimensions for the XO350 and XO750. Both of these use a bolt on installation so you really only need to know the height of your tongue to see if it is compatible. The #ORJW350D fits 2" to 6" tall…

view full answer...

Answer 7

Hey, Bill! Happy to help out here. The ST235/75R15 tire included with the wheel/tire combo #KE32JR is actually approved to be mounted on several rim widths, 6", 6-1/2", 7", and 7-1/2". So while 6" is the narrowest option,…

view full answer...

Answer 8

The Titan Zinc-Plated, Leverlock Coupler #T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the…

view full answer...

Answer 9

The mounting plate on the ARK Removable Extreme Off-Road Swing-Up Trailer Jack #ARK57FR is 5-1/2" wide and 7-1/2" tall. It is designed with several bolt hole patterns(see image) to fit trailer tongues from 2-6" tall.

view full answer...

How To Confirm Fit of the Extreme Off-Road Swing-Up Trailer Jack

Product Page this Question was Asked From

Continue Researching