Thread Size of Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails

Question

Question:

What is the thread size and pitch on this nut?

asked by: Charles

0

Expert Reply:

Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails - Qty 1 # TA01-2100N has a threaded hole that is 3/8-16.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Replacement Mounting Hardware for Recovery Tracks for Yakima Ladder Racks part #Y83FR are M8 x 18mm.

view full answer...

Answer 2

The T-slot channel dimensions for the Yakima HD Crossbars #Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with…

view full answer...

Answer 3

The square blocks included with Rhino-Rack track adapter kit #RRT-FK3 are 0.71 inches long, 0.51 inches wide, and 0.12 inches thick.

view full answer...

Answer 4

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 5

The Replacement M10 Channel Nut for Rhino-Rack Accessories #RR89TB has a M10 thread size and base dimensions of 35mm x 19mm x 8mm.

view full answer...

Answer 6

From your picture, it looks like this is possible and might not affect the use of a folding hard tonneau cover like the BAK Flip MX4 #BAK448333 or the BAK Flip F1 #BAK72122 , but the main issue may not be the rail as much as it is the slanted profile…

view full answer...

Answer 7

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT-781 has been confirmed to be compatible with the BAK Revolver X4s Hard Tonneau Cover #BAK72VR. I've attached a couple of pictures below showing these two in use together. Both of…

view full answer...

Answer 8

Thank you for the purchase and yes, the correct base rails for your 2020 Chevy Silverado 1500 with a 6-1/2 foot bed are indeed the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21781. They can only be mounted if the bed rails of…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Thread Size of Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails

Product Page this Question was Asked From

Continue Researching