How to Install Kodiak Red Eye Trailer Bearing Protectors, # KREB1980AC
Updated 12/01/2012 | Published 11/04/2012
Question:
how do one install it?
asked by: Shan
0
Expert Reply:
You would install the Kodiak Red Eye bearing protectors, # KREB1980AC, the same way you would install any drive-in style unit. What many people do is take a block of wood, place it on the outboard side of the protector, and use a mallet to drive it in. The wood will distribute the force of the mallet more evenly so it will drive in straight. If it is not straight it could come out when the wheel is turning.
expert reply by:
Michael H
0
Continue Researching
- Q&A: Recommended Disc Brake Hubs, Lines, and Hydraulic Actuator for a Boat Trailer w/a 3,500 lbs Axle
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Video: Checking Out the Kodiak Hydraulic Brake Line Kit
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 1' Long
- Shop: Demco Hydraulic Brake Hose with Fittings - 19" Long
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Q&A: Recommended Locking Pin for a Demco Hydraulic Brake Actuator and How to Insert It
- Q&A: How to Wire Reverse Lock Out Solenoid on Hydraulic Trailer Brake Actuating Coupler
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Q&A: Removing a Weld-On Trailer Coupler to Replace With a Bolt-On
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Q&A: Pin Will Not Insert Fully Into Dexter DX7.5 Drop-N-Go Brake Actuator
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel - Qty 2
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Q&A: Comparing Bearing Buddy and Kodiak Red Eye Trailer Bearing Protectors
- Search Results: bearing buddies
- Shop: Trailer Wiring
- Search Results: b and w 5th wheel hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
Explore Expert Info
![Our Expert]()
on Trailer Bearings Races Seals Caps
on Trailer Bearings Races Seals Caps
Shan P.
12/1/2012
How about how much grease to pack into the protectors and how to pack it?There is also a tiny hole on the side of it. What is it for and which direction should the hole face down, up, sideways when installing?Thanks in advance.