Mounting the Rola RBE System to my 2014 Honda CR-V Flush Mount Rails

Question

Question:

Can the Rola R4002 Rail Extreme RBE Roof Rack Crossbars be mounted anywhere along the flush rails on a 2014 Honda CRV or only at factory crossbar suggested locations?

asked by: Jim

1

Helpful Expert Reply:

Great News! The Rola Rail Extreme RBE Series Roof Rack part # R4002 can be installed any where along the flush rails to match different accessories that have different crossbar requirements.

expert reply by: Randy B

1

Answer 1

We do have roof racks for your 2014 Honda CR-V that has flush (not raised) side rails on its roof. Some of these racks, like the Rhino-Rack Vortex do install using the vehicle's fixed mounting points, while others from SeaSucker like their Monkey…

view full answer...

Answer 2

Since your 2015 Honda CR-V has flush-mounted rails the roof racks that fit the car will each install into fixed mounting points so there is not a way to add a larger spread. For a roof rack that will carry your canoe a great option is from Rhino-Rack…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 7

Hey Steve! I checked the flat towing set up and required parts for your 2014 Honda CR-V and you don't need a charge line like item #RM-156-25 because you don't disconnect your battery. Here are the rest of the parts you'll need to flat…

view full answer...

Answer 8

In order to flat-tow a 2012 - 2014 Honda CR-V with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low…

view full answer...

Answer 9

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 10

For your 2014 Honda CR-V, using the Blue Ox Patriot Portable Braking System #BLU37TR, you're going to need to add the: -12 Volt Outlet Kit, 20 amps #RM-9332 to be able to properly power and operate your system. Additionally, if you are interested…

view full answer...

Answer 11

Based on the dimensions you listed the equalizer you need is the part #TREQE1. This equalizer has 7-3/4 inches between the mounting holes from left to right and 2-7/8 inches vertically.

view full answer...

Answer 12

For the Bulldog trailer jack #BD195362 we have the replacement bevel gear kit part #BD500106, bearing kit #BD500251, and replacement handle #BD500105.

view full answer...

Mounting the Rola RBE System to my 2014 Honda CR-V Flush Mount Rails

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching