Over/Under Conversion Kit for 2019 Coleman Lantern LT 17FQ and Weight Distribution Hitch
Updated 08/06/2020 | Published 08/04/2020
Products Featured in This Question
Question:
I just purchased a 2019 Coleman Lantern LT 17FQ. I’ve read that a lot of guys have flipped the axles but I was thinking an over/under kit would be a smarter option. Do you make one for this model? Additionally, I haven’t towed it yet but was wondering what you recommend in terms of sway bars. Thank you!
asked by: Mike S
Expert Reply:
So "flipping the axles" is just another term for an over/under conversion kit, and so long as your 2019 Coleman Lantern LT 17FQ has round axles as opposed to torsion axles, this will be a smart thing to do in order to get more ground clearance.
Based on my research this trailer should have a 3,500 lb axle, which is 2-3/8" diameter. You will want to verify that, and if so then what you need is the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00.
This kit lifts your trailer approximately the same amount as your axle's diameter plus the height of the leaf spring pack.
As far as anti-sway I highly recommend a weight distribution hitch, as this will not only minimize sway but also keep your vehicle level to reduce sag. For a 2019 Coleman Lantern LT 17FQ I recommend the Fastway e2 Weight Distribution with 2-Point Sway Control # FA92-00-0600.
This system uses 2 points of sway control via friction in the spring bars to greatly reduce trailer swaying. It also uses clamp-on brackets so you won't have to drill along your trailer frame, and allows you to back up with the system on, which not all do. The Fastway is also a much more budget-friendly option than many systems while still being high quality which makes it a great value.
You will also need a hitch ball with this system, depending on the size of your trailer's coupler, either 2-5/16" Hitch Ball # EQ91-00-6100 or 2" Hitch Ball # EQ91-00-6080.
I have added links to video reviews for you as well.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: lift
- Q&A: Lift Kit Needed For A 2024 Dutchmen Coleman Lantern 17B Travel Trailer
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Article: Trailer Wiring Diagrams
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Trailer Hitch
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: trailer jack
- Shop: Suspension Enhancement
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: trailer wiring
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Brake Controller
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer leaf springs
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Gooseneck Hitch
- Article: How to Raise Your Travel Trailer Height
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Search Results: spare tire mount
- Shop: Base Plate for Tow Bar
on Trailer Suspension Parts
