Comparing Timbren Suspension Enhancement Kit for 2015 Ford F-150 To Factory Bump Stop

Question

Question:

What is the overall installed length of the the kit, compared to the factory bump stops Timbren Suspension kit for 2015 f 150

asked by: Steve N

1

Helpful Expert Reply:

The Timbren Suspension Enhancement System - Rear Axle # TFRTT1504E once the brackets are installed on the top and bottom and with the integrated spacer will give you 1-1/2 inch of clearance between the jounce spring and bracket compared to the 4-1/2 or so inches more movement with the factory jounce bump stop. I've attached a video that shows the comparison for you.

expert reply by: Jason S

1

Answer 1

Hey Jeremiah, the Hellwig EZ-990 part #HE67FR can add height if you tighten them down enough. Basically how tight you go with the U-bolts will raise the suspension between 0 and 2 inches.

view full answer...

Answer 2

G, Yes both the Hellwig EZ-990 Helper Springs #HE67FR and the SumoSprings Solo Custom Helper Springs #SSR-117-47 can be used together. The SumoSprings will replace the factory bump stops, and the Hellwig bolts above the factory leaf springs so the…

view full answer...

Answer 3

You are going to want to use a Equal-i-zer Weight Distribution System #EQ37100ET for towing your new camper behind your 2015 Ford F-150. The weight distribution helps to transfer weight to the front of your F-150 which will help regain your normal…

view full answer...

Answer 4

The rear suspension enhancement system I highly recommend for your 2020 Ford F-150 is the Timbren Rear Suspension Enhancement System #TFR1504E because these jounce springs will improve your truck's handling and performance, offering your…

view full answer...

Answer 5

Yes, we do have a Timbren Suspension System for a 2WD 2022 Ford F-150. Item #TFRTT1504E has a 7,000 lbs capacity and is made specifically for 2WD F-150's. The spring becomes more rigid as more weight is added for great performance when you're…

view full answer...

Answer 6

The best choice of rear axle suspension kit for your 2018 F-150 will depend on the type of towing or hauling you're doing. All rear-axle kits for your 4WD F-150 appear on the linked page. If you are routinely hauling cargo loads of widely varying…

view full answer...

Answer 7

The Timbren Suspension Enhancement System item #TFRTT1504E has a total height of 6.75” with a 1” spacer. This system is confirmed to fit your 2015 Ford F-150. I have linked an installation video below.

view full answer...

Answer 8

We do have the Timbren kit you are looking for with the part #TFRTT1504E. This has a load leveling capacity of 14,000 lbs like you are looking for.

view full answer...

Answer 9

Because the Timbren suspension systems like the #TFRTT1504E you installed operate more as a longer bump stop, driving in conditions like you've mentioned and with the spring not engaged to the axle while under load, you're going to get a…

view full answer...

Answer 10

The Timbren Rear Suspension Enhancement System #TFR1504E is a fit for a factory height 2017 or 2018 Ford F-150. To drop the truck height will require custom fabrication as you stated. There isn't a spacer, just the brackets and the jounce spring,…

view full answer...

Answer 11

Yes, you are on the right track with what you are trying to accomplish. You will want to have the Fastway e2 Weight Distribution #FA92-00-0800 set for the weight of just the travel trailer. Then you can use the Air Lift LoadLifter 5000 Ultimate Air…

view full answer...

Answer 12

The Timbren Suspension Enhancement System #TFRTT1504E is a confirmed fit for your truck. With a 1,100 lb tongue weight trailer, this system will help to keep the rear end from squatting and your headlights from being too high to see the road as…

view full answer...

Comparing Timbren Suspension Enhancement Kit for 2015 Ford F-150 To Factory Bump Stop

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching