Pad Recommendation for 6" Round Leg on NuCamp T@B 320 Trailer

Question

Question:

We have a NüCamp T@B 320 Tear trailer and the bottom of our stabilizer measures 6”. I can’t find them on your site. Or is there an 8”x8” rubber block of whatever height we could use instead of the legos? When we store, we use cinder blocks. Thanks!

asked by: Colleen D

1

Helpful Expert Reply:

An alternative to the 6" SnapPads that I recommend using is the StayPut Jack Stand Pad w/ Handle # A10-0923. This is a 4 pack of 6" x 6" square pads that you can use both for your front stabilizer legs as well as your front trailer jack when needed. Since this is a 6" square it will fit really well with your 6" round stabilizer legs, and there is a little bit of a lip around the edges as opposed to the raised block style that you're currently using.

expert reply by: Jon G

1

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…

view full answer...

Answer 7

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

view full answer...

Answer 8

Hey Ken, yes the Replacement Pad for SnapPad Jack Stand Pad System #SP74FR that you referenced is made by Snappad. This is for sure not a knock off! What camper do you have?

view full answer...

Answer 9

I sure can Jesse. The Curt Hitch item #C37RV and the Curt Wiring Harness item #C34FR73HY are indeed confirmed to fit your 2026 Kia Sorento EX Hybrid. The Curt Hitch item #C37RV is a custom fit class III hitch with a 2" receiver. It comes with…

view full answer...

Answer 10

Hi Jerrod; the correct wiring harness for your 2025 Hyundai Santa Fe HTRAC AWD is the Curt T-Connector Vehicle Wiring Harness #C29ZV you were looking at. This will plug into the connection points in your rear cargo area and then a hot lead will run…

view full answer...

Answer 11

Hey Patbet, the Curt hitch part #C37RV that you referenced that fits your 2025 Hyundai Santa Fe does not require any modification or drilling to install. It's one of the easier hitches to install for sure. Do you have a bike rack already?

view full answer...

Answer 12

Hey Kevin, this is a great question but the difference between the two Furrion Propane RV Range/Ovens is the color. The part #FR97KR has a stainless steel panel behind the knobs and the part #FR43TF instead has black. Both will work great but I would…

view full answer...

Pad Recommendation for 6" Round Leg on NuCamp T@B 320 Trailer

Product Page this Question was Asked From

Continue Researching