Replacement For a Shelby Jack With a 5-1/2 x 3" bolt Pattern

Question

Question:

Is there a bolt pattern that is 5 1/2 inches by 3 inches I have dhm trailer and it had shelby trailer kack

asked by: Jerome C

0

Expert Reply:

We do not currently have a jack with a 5-1/2" x 3" bolt pattern to match the bolt pattern on your welded plate. I have measured a few different jacks to double check fit. I recommend the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs Item # FXP10. Fits 3" x 5" frames and does not require any drilling into the frame. If you prefer a weld on style I recommend Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs Item # FXP10W0301 and the Jack Mounting Bracket for Fulton Marine Jack - Weld-On Item # P9012-00. Both Jacks are designed for marine applications with a durable zinc coating to provide excellent corrosion resistance.

I have provided links to a couple review videos so you can take a closer look at them.

expert reply by: Shane H

0

Answer 1

Since we do not have a Shelby jack mounting bracket that goes to the discontinued Shelby Jack #5876A8, I have no way to confirm whether or not a Fulton jack will fit it. With that being said, the Fulton Bolt-Thru Swivel Marine Jack #F1411300301 is…

view full answer...

Answer 2

On a 2014 GMC Yukon there is no place to plug in a controller but the vehicle does have a tow package wire bundle up under the dash, to the left of the steering column, held together with a white tag. I have linked a video on a 2013 Yukon XL that…

view full answer...

Answer 3

The Fulton Bolt-Thru Swivel Marine Jack #FXP15W is a bolt through replacement option for you. This is designed to use a welded plate like the Jack Mounting Bracket for Fulton Marine Jack #P9012-00. It appears like you have a bolt that goes into a…

view full answer...

Answer 4

I have an option for you, but since Shelby is out of business you will not be able to purchase another Model 5856A jack. Instead I recommend replacing it with the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200…

view full answer...

Answer 5

If the trailer is heavy, or the ground is uneven, it will be hard to move regardless of which jack you use but if the bearings are wearing out in the old one then a new one would surely take some strain off the user when moving. I recommend a dual…

view full answer...

Answer 6

I do have an option for you but Shelby is no longer in business and there aren't any direct replacement jacks which use the same mounting bracket. I recommend simply removing the old jack and placing a bolt-on jack either in front of or behind…

view full answer...

Answer 7

In order to be able to plug in a brake controller on your 2011 Ford van it will have to have come with either a factory 4-Way or 7-Way trailer connector. If it did not then the brake controller will have to be hardwired in. On a 2011 Ford E-350 Van…

view full answer...

Answer 8

On you 2011 Ford E-350 Van, you will need to get the brake light signal off the cold side of your brake light switch. Using a tester, like #PTW2993, you will find the wire on the switch that is only energized when the brake pedal is being pressed.…

view full answer...

Answer 9

I do have an option for you but we do not have an exact replacement for the Shelby Jack 5764A. Instead, I recommend taking a look at the Fulton Bolt-Thru Swivel Marine Jack part #FXP10W0301. This jack similar to the Shelby uses a bolt through swivel…

view full answer...

Answer 10

Shelby jacks are no longer in production. If the welded mount had a bolt-thru design, then I recommend checking the pin hole dimensions for compatibility. The bolt hole centers are 3 inches apart on the Jack Mounting Bracket for Fulton Marine Jack…

view full answer...

Answer 11

From the measurements of the mount you provided it sounds like the Fulton Bolt-Thru Swivel Marine Jack #FXP10W0301 will work. The Jack Mounting Bracket #P9012-00 that the Fulton #FXP10W0301 uses is 4 5/16 inch x 4 7/16 inch and has 4 holes 3 inches…

view full answer...

Answer 12

A boat trailer jack that uses a snap ring works differently than one that is a bolt-on, like yours, because the mounting bracket for a bolt-on jack and snap-ring jack will be different. Because you have a Fulton 1,200 lb bolt-on jack, I assume your…

view full answer...

Replacement For a Shelby Jack With a 5-1/2 x 3" bolt Pattern

Featured Help Information

Miscellaneous Media

Continue Researching