Which Roof Vents Does the DMC38FR Work With

Question

Question:

I have a 2020 Fantastic Fan. My vent lid fully open is 10.5” tall. The dimensions of part # DMC38FR Indicates it’s only 10.25” tall. Will this cover work for my application? Thanks,

asked by: Bill C

1

Helpful Expert Reply:

Yes. The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR is designed specifically to fit ALL Fan-tastic Vent trailer roof vents, so you won't have any issues with fitment. This does sit on the top of raised brackets that are installed on the vent, which is going to provide you with the 1/4" difference you're seeing and allow the roof vent to completely open.

expert reply by: Erik B

1

click to enlarge

Answer 1

Yes, either the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-81 or the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-80 will work great as a…

view full answer...

Answer 2

The Ultra Breeze Trailer Roof Vent Cover which fits over your Dometic vent FV1400 is available in Black #DMC38FR or White #FVU1500WH. These covers are custom molded so the vent lid fits into the cover when opened.

view full answer...

Answer 3

When using a vent cover like the #DMC38FR which does not allow the vent to open all the way, the motor will stop once it feels resistance and it will hold that position without any problems.

view full answer...

Answer 4

Covers like the Dometic Ultra Breeze Trailer Roof Vent Cover #DMC38FR you were looking at prevent vents from fully opening but come with a statement from the manufacturers that it's totally fine and that the vent still performs as it should even…

view full answer...

Answer 5

No vent cover on the market is tall enough to let the vent to fully open lid, but this is known by the manufacturers who all state that the covers allow the lids to open enough for the vent to properly operate. Powered lift vents should stop once…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 10

Hello Lee, thanks for reaching out. If air won't go in at all it could be a bad/clogged valve. You could also have a major leak somewhere. Have you tried a soap test to see if there are any leaks?

view full answer...

Answer 11

For your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs #RP94720 you will need the Air System Service Kit for Reese Goose Box 5th Wheel to Gooseneck Air Ride Coupler Adapter #RP86007 which will…

view full answer...

Answer 12

Hello Marc, thanks for reaching out. The Intelli-Power converter/ charger Model PD9260C can only charge lead acid batteries, it will not work with lithium. That said, we do have a suitable replacement for this that is lithium compatible. For that I…

view full answer...

Which Roof Vents Does the DMC38FR Work With

Product Page this Question was Asked From

Continue Researching