Which Coleman Mach RV AC Shroud Should be Used

Question

Question:

Is MA8335A5261 the correct replacement shroud for model 7333C886? What is the difference between this and MA00-325001?

asked by: David

0

Expert Reply:

The part number you mentioned from Coleman indicates you have a Coleman Mach RV AC unit which the part # MA00-325001 is a fit for. Compare this to the dimensional picture I attached as well.

The part # MA8335A5261 is for older models and could be what you'd need but you should be able to tell by looking at the two shrouds which style yours needs. This has dimensions of 13.8" high x 26" wide x 38" long.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Basically the MaxxAir Replacement Shroud for Coleman-Mach #MA8335A5261 and the MaxxAir TuffMaxx #MA00-325001 fit the same Coleman Mach AC units but are two different styles of cover. I like the two piece part #MA8335A5261 better as it will be a bit…

view full answer...

Answer 2

The correct replacement shroud for a Coleman Mach (6759B717) is the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover for Coleman-Mach RV Air Conditioners part #MA00-325001.

view full answer...

Answer 3

Based on the research I've done, it sounds like you 1986 Winnebago LaSharo has an older Coleman Mach 3 series AC unit. So the correct replacement shroud is the MaxxAir TuffMaxx Replacement Shroud for Coleman-Mach RV Air Conditioners #MA00-325001.…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Which Coleman Mach RV AC Shroud Should be Used

Continue Researching