Trailer Wiring and Transmission Cooler Recommendation for a 2008 Acura MDX

Updated 08/28/2012 | Published 08/26/2012

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(238)

$37.80

Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient

(874)

$103.83

Question:

Do you have wireing for this hitch? any videos on wireing for brake lights, signals? do you need to do anything with a transmission cooler?

asked by: Anthony M

Expert Reply:

The wiring kit I would recommend you use on your 2008 Acura MDX would be the Curt Custom Fit Vehicle Wiring # C56038. This product will plug into your vehicle and will operate the brake lights and turn signals of your trailer, check out the installation instructions I attached.

I would recommend you get a supplemental transmission cooler for your vehicle if you plan on towing. The factory transmission cooler is often adequate at best for non-towing situations, so a supplemental cooler would greatly help extend the life of your transmission.

Transmission coolers are not vehicle specific, you will need to measure the area in front of your radiator to determine what size cooler will fit and pick the one with those dimensions. If you can fit it, I would recommend you get a Derale Transmission Cooler # D13503. Check out the FAQ article I attached on transmission coolers.

expert reply by: Jameson C