Will 14" x 14" Roof Vent Fit a 2015 Lance 1052 Camper with 14-1/4" x 14-1/4" Roof Opening

Updated 06/11/2020 | Published 06/09/2020

Products Featured in This Question

Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid

(90)

$212.98

Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White

(355)

$63.15

Replacement Key Wall Control For MaxxFan Plus and Deluxe - 4 Key

(198)

$20.34

Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent - White

(167)

$25.71

Question:

Hello , I have a Lance 1052 truck camper 2015 and wanting to replace my roof vent fans with the Maxx Air roof vent fans , however I am now worried I may not get to use Maxx Air , because I measured 14-1/4×14-1/4 with the vents i have .and Maxx Air I understand measurments are 14x14 .Is this a concern or can the Maxx Air vent fans still be installed regardless of that 1/4 difference

asked by: Brian

Expert Reply:

You will definitely be able to install the MaxxAir MaxxFan Plus Roof Vent w/ 12V Fan # MA00-04751KSX on your 2015 Lance 1052 truck camper just fine. Basically anybody that measures 14" or 14-1/4" for a vent has the same vent dimensions. People will measure either the opening on the inside or outside, the lid, or even just the opening in their roof which is where the slight differences come into play. If you measured 14-1/4" then the MaxxAir vents will fit like a glove.

Please note that if you go with the part above then you'll also need the wall control panel # MA00A03550K and the garnish # MA54FR. If you don't already have screws and sealant then I recommend using the kit # 344270KITW to complete the installation.

expert reply by: Jon G