Correct Replacement Hub/Drum for 1994 Haulmark Elite 24' Trailer
Updated 05/28/2020 | Published 05/23/2020
Products Featured in This Question
Question:
Hello. I had a hub failure and wanted to make sure this the accurate replacement before purchasing. I have a 1994 haulmark elite 2. 24ft enclosed with 3500k axles 4.5 bolt pattern with electric brakes. I have attached A pic of the broken hub and one of which is still in working order. Please confirm and I will order. This is our racecar trailer and are slated to race in roughly a week. Thank you
asked by: Mike G
Expert Reply:
The Trailer Hub and Drum Assembly part # AKHD-545-35-K for standard or part # AKHD-545-35-EZ-K for easy lube are what you need to replace the hub on a 1994 Haulmark Elite 24' Trailer.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: 205/75~15 trailer tires and wheels
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Search Results: torsion axle
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Q&A: B&W Biker Bar Compatibility with Air Ride Suspension on 2002 Harley Davidson Road King FLHR
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 95" - 7,000 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Equalizer for a EQ-356
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
- Q&A: Replacement Hub for AxleTek Hub # BD2-545-17