Replacement Jack Compatible with Welded Jack Plate on Ranger Boat Trailer

Updated 05/26/2020 | Published 05/21/2020

Products Featured in This Question

Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs

(172)

$192.56

Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks

(38)

$28.78

Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K

(1736)

$96.23

Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K

(1736)

$96.03

Question:

HI I have a ranger boat with a welded on plate and the jack is bad. The mounting bolts hole are 3inches apart height x 5.5inches apart length that is center of hole to center of hole. DO you have any thing that would have the same size bolt pattern ?

asked by: Randy O

Expert Reply:

For your welded plate, the Replacement Bolt-On Mounting Kit for Fulton XP Series Jack # F500349 sounds like what you are describing but it isn't a welded plate. If that is similar to what you have, then I recommend the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301.

The center bolt is the style that many jacks will work with. If you have this, then this will be a good fit. If that isn't what you have then the snap ring jack like the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 is the other alternative weld on bracket option.

expert reply by: Jason S