bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Trailer Suspension Parts Help Hub
  4. Trailer Suspension Parts Q&As
  5. Question 439064
Q & A Icon

Replacement Equalizer and Hanger Recommendation to Replace EQE1  

Updated 05/05/2020 | Published 05/04/2020



Question:

Hi, I have a PJ car trailer and I am looking to replace the suspension components that are worn. The pivot bracket is stamped with a EQ-E1, I see it listed on your website but does that one come with a particular set to replace all the bushings and such? Thanks.

0

Expert Reply:

For a kit that comes with the same size equalizer as the # TREQE1 that you have that also includes bushings, hangers, and a hanger bolt you'd want the # APT3HD. This also comes with shackles and everything else needed so you'd be set with just the one part number.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Trailer Suspension Parts

Videos

Help Articles

Expert Answers

Others Also Watched
Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
Measuring To Choose The Right Trailer Axle
Pacbrake Alpha Air Bag Suspension Kit Review and Comparison
B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
Manufacturer Spotlight - SuperSprings Vehicle and Trailer Suspension
Checking Out the Pace Edwards Switchblade Retractable Hard Tonneau Cover
Choosing the Right Vehicle Suspension Upgrades
Others Also Read
Replacing the Bearing, Races and Seals on a Trailer Hub
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
How to Measure Your Trailer Wheel Bolt Pattern
How to Accurately Measure Trailer Leaf Springs
5 Things to Know About Weight Distribution Hitches
Trailer Lighting Requirements
4 Steps to Choosing Your 5th Wheel Pin Box
Choosing the Right Suspension Kit for Your Truck and Trailer
Double-Eye Trailer Suspension System Review
Others Also Asked
Replacement Axle and Leaf Springs for Trailer With Lippert 3,500 lb Axle

Hi Josh; what you have is a Lippert 3,500 lb axle with an 85-1/2" hub face measurement (length) and 70" spring center measurement. All of our 3,500 lb axles are too long to replace what you have so I would reach out to Lippert or Dexter to…

view full answer...
Comparing Chinese Bearings with Bearings Made in the USA

A bearing, no matter where it is made, has to meet certain standards for use in the United States. With that said there are some cases where despite having to meet these standards, the US made product is better. When it comes to bearings though I…

view full answer...
Are Chinese Bearings Safe to Use on Trailers

The vast majority of bearings that are used on trailers are manufactured in China. I know that there is a looming mentality that anything from China is cheap and will break easily, but in the case of bearings, like the popular #L44649, you will get a…

view full answer...
Bearing Kits For Lippert 3,500LB Trailer Axles

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

view full answer...
Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies

Yes, the Electric Trailer Brake Kit - Self-Adjusting #AKEBRK-35-SA that you referenced are an exact replacement for the AxleTek assemblies you have now that have Axletek-10-GG stamped on them. If you check out the attached picture you can see the…

view full answer...
Should a Trailer Brake Magnet Make Contact with a Drum Even With No Brakes Applied

The magnet should only make contact with the inside of the brake drum when power is applied to the magnet. If it is making contact with the drum all the time, you may have residual power running on the brake wire that is just enough to cause the…

view full answer...
Dexter EZ Lube Bearing Kit Recommendation for 3500 lb EZ Lube Spindle that Includes Nut Retainers

The most cost effective way to get the nut retainers is to get the part #BK2-100 and then instead of using the cotter pins use the part #RG05-100 instead. The kit for your hub isn't available and by the time you piece all of the components…

view full answer...
Troubleshooting Trailer Hubs Where One is Hotter Than the Other

If you turn the wheels by hand do you notice one wheel dragging more than the other? If so that would indicate additional friction which would create more heat. I imagine you'll find this to be the case. If the brake adjustments are the same and…

view full answer...
Can Manual Electric Drum Brakes Be Converted to Self-Adjusting By Swapping Brake Adjustment Screw

Parts from manual and self-adjusting brakes are not interchangeable. Unfortunately, this means you cannot add the #048-023-00 to your current brakes to make them self-adjusting. There is more to self-adjusting brakes than the adjuster screw so the…

view full answer...
Solution for Trailer Drop Axle that Blocks Brake Adjustement Star

Hey Paul, this is a great question but basically you can rotate the assemblies forward or back so that you can access the adjustment window as needed. Or if the assemblies you have are self adjusting you wouldn't ever really have to mess with it.…

view full answer...
Recommended Replacement Gen-Y Pin Box for a Lippert 1621 HD Pin Box

Hey Ronald, I went ahead and cross-referenced with Lippert and it looks like you have a 1621HD pin box so the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY46FR will work as a replacement.

view full answer...
Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...