Difference Between TST-507-FT-4 and TST-507-FT-4-C Truck Systems Technologies Tire Pressure Monitors

Question

Question:

what are the diferences between a TST-507-FT-4 AND THE FT-4-C ???

asked by: Eduardo R

0

Expert Reply:

The only difference between the Truck Systems Technologies Tire Pressure System # TST-507-FT-4-C and the # TST-507-FT-4 is that the # TST-507-FT-4-C features a color display monitor and the # TST-507-FT-4 uses a black/white display monitor. Other than that, they're identical.

I've linked to a product demonstration video featuring the # TST-507-FT-4-C.

expert reply by: Mike L

0

Answer 1

Hey Michael, this is a great question but the difference between the TST TPMS part #TST44VR and the part #TST-507-RV-4-C is just the display. The part #TST-507-RV-4-C is a display with buttons along the side of it it to make changes whereas the part…

view full answer...

Answer 2

Hey Steve, Since you're wanting to monitor both the dually and trailer and would need 8-10 sensors I recommend the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM56FR. The sensors check the temp and psi every six seconds to help…

view full answer...

Answer 3

Yes, we have the TST TPMS for RVs #TST-507-FT-4-C available with the grayscale display listed as part #TST-507-FT-4 on our site. This includes the signal booster and the 4 flow through tire sensors as well.

view full answer...

Answer 4

I'd recommend a TPMS system from TST, Truck Systems Technologies, because they're highly rated by our customers, they work great and their customer support is outstanding. To keep costs down, I'd recommend a system going with a system…

view full answer...

Answer 5

According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…

view full answer...

Answer 6

Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part #TST-507-INT-S1. Definitely a good idea if you don't want to have to worry…

view full answer...

Answer 7

I think you'll be better off using all internal tire sensors instead of mixing and matching on your 2023 Winnebago View. TST manufactures the highest quality sensors, so that's who I recommend going with, and for six sensors use the TST TPMS…

view full answer...

Answer 8

If you have wheel liners then you want to use the 135 degree bend kit part #WM8001-135 but if you have wheel covers then you need the 90 degree bend kit part #WM8208 instead. Attached are demonstration videos of each for you to reference.

view full answer...

Answer 9

The TST TPMS for RVs - Grayscale Display - Signal Booster - 4 Flow Through Tire Sensors #TST-507-FT-4 can be used on your set up. Range on the sensor can vary depending on the specific environment and conditions at hand. It will be, in the perfect at…

view full answer...

Answer 10

The operating frequency of the Signal Booster / Repeater for TST TPMS #TST-507-R is 433.92 MHz.

view full answer...

Answer 11

I reached out to the manufacturer, TST, about the Signal Booster for TST TPMS #TST-507-R, who told me the following: 1) The repeater does come with an inline fuse on the positive (red) wire. 2) All current repeaters do come with ring terminals. 3)…

view full answer...

Answer 12

When the light of the #TST-507-R is on solid that means it has power and the sensors are reporting info that it is picking up. It will occasionally blink as it's transmitting info. When you press the button and it's blinking and beeping…

view full answer...

Difference Between TST-507-FT-4 and TST-507-FT-4-C Truck Systems Technologies Tire Pressure Monitors

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching