Replacement Gasket for Master Cylinder of Titan Model 60 Actuating Coupler

Question

Question:

Do you sell the gasket for the Titan 60 master cylinder? Thanks

asked by: Mark Z

0

Expert Reply:

The Titan Model 60 will use the Replacement Cover Gasket for Titan Aero 7500 Master Cylinders # DX37FR. If you need the entire kit use Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100.

expert reply by: Jason S

0

Answer 1

The Dexter Brake Actuator part #099-175-20 replaced the Titan 60 that has a master cylinder with a fitting at the end. The fitting is a 3/16 inverted flare where the brake lines connect to. You do not need an extra fitting when you use the actuator.…

view full answer...

Answer 2

I have attached an image from the operation manual for the Demco Hydraulic Brake Actuator #DM8669112 that details how to bleed the brakes. The process consists of first elevating the trailer tongue about 4 to 6 inches and then loosening or removing…

view full answer...

Answer 3

There is a full replacement master cylinder that also includes the filler cap, orifice fitting, and hardware. The correct part for your Model 60 with drum brakes is the following: - Replacement Master Cylinder Assembly #T4395100

view full answer...

Answer 4

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

view full answer...

Answer 5

The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…

view full answer...

Answer 6

Hey Tony, welcome back! The Titan Zinc-Plated Brake Actuator item #T43329007K you purchased has a plunger you can access for purposes of bleeding the system of air. You will want to remove the plate that surrounds the breakaway lever to access it.…

view full answer...

Answer 7

Hey Shaun, thanks for reaching out! The Dico Replacement Master Cylinder for Model 60 Actuator 23361 was replaced by the Replacement Master Cylinder Assembly #T4395100 so you'll want this instead of the Demco #DM24ZR you were looking at.

view full answer...

Answer 8

The Replacement Master Cylinder Assembly #T4395100 will not work to replace your Atwood master cylinder model 85841. Since replacement parts for your actuator are obsolete, your only option is to replace the entire actuator assembly. The Demco…

view full answer...

Answer 9

Hey Breck, the Titan Zinc-Plated, Leverlock Brake Actuator #T43329007K that you referenced does not have a manual lock out feature at all. Normally if you were using this actuator you would install free-backing brake assemblies on the axles to…

view full answer...

Answer 10

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Replacement Gasket for Master Cylinder of Titan Model 60 Actuating Coupler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching