Can Plastic Trailer Roof Vent Lid with Continuous Hinge Be Replaced with Metal Lid  

I spoke with my contact at Command regarding the LED RV Interior Light #328-K-1050Q9 referenced in your question. The LED unit has a draw of 0.26 amps. I have attached a short video demonstration for this light that you can also take a look at.

In the highest speed setting the fan of the Fan-Tastic roof vent part #FV802250 that you referenced will draw 3 amps. 3 amps is 36 watts.

Hi Rick, LaSalle Bristol's roof membrane is made of PVC which is known to be durable and offer better protection against punctures and overall weathering. Alpha Systems offers TPO roof membranes that are more environmentally…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Thanks for all the detailed information! For a 15,000 BTU AC Unit to replace your Dometic B57915.711C0, you will want the Advent Air Replacement RV Air Conditioner for Dometic Setup item #ACDOM150B in black or item #ACDOM150 in white. These are…

The best way to ensure proper identification of the correct parts for your broken awning arm is to first find the identification tag on your arms. Often times this tag is located inside the arm itself so the awning must be extended to see it. Also…

For your 58 inch Lippert Edge RV awning the correct replacement idler arm is the part #LC62ED and the correct replacement drive arm (one with the motor) is the part #LC22ED.