Will the roadmaster Comfort Ride Shock Absorbers Fit a 2019 Grand Design Reflection 28BH
Updated 04/21/2020 | Published 04/20/2020
Question:
I have a 2019 Grand Design Reflection 28BH. I am looking at getting the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle Item # RM-2460. The upper bracket gets bolted to the frame. On my 5th wheel the leaf spring brackets are welded to a square tube which is then welded to the frame. The square tube is thinner than the frame. My question is does the square tube have enough material for the bracket to be bolted to it. Has there been any reports/issues with the bolts pulling/tearing out of the square tube. I have attached two pictures to show square tube.
asked by: William V
Expert Reply:
On your 2019 Grand Design Reflection 28BH the square tube the hangers are mounted to will be plenty strong but likely won't be how the Roadmaster Comfort Ride Shock Absorbers # RM-2460 will mount. The mounts will be to the inside of the hanger locations and the mounts connect to the flat underbody portion of the trailer. I've attached a video to assist.
Product Page this Question was Asked From
Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 6000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Installation Guide for the Roadmaster Comfort Ride Leaf Springs - 2018 Grand Design Reflection Fifth
- Q&A: Do Roadmaster Comfort Ride Leaf Springs Require New Bushings
- Q&A: LCI Road Armor Wet Bolt and Bushing Kit
- Q&A: Replacement Wet Bolt and Bronze Bushing For a 2022 Grand Design Imagine 2800BH With MORryde CRE 3000
- Shop: Replacement Equalizer for E-Z Flex Suspension Kits - 1-3/4" Double-Eye Springs - Triple Axle
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Shop: E-Z Flex Equalizers - Double-Eye Springs - Tandem Axle - 8,000 lbs - Qty 2
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Dexter Shackle Bolt for Double Eye Springs - 9/16" Diameter - 2-7/8" Long - Qty 1
- Search Results: timbrin
- Search Results: axle lift blocks
- Search Results: roadmaster shocks
- Q&A: Lifting Jayco 5TH Wheel Camper With Triangular Shaped Leaf Spring Hangers
- Q&A: Can 2-1/4 Lift Kit be Installed on 5th Wheel Trailer With Lippert Correct Track System
- Shop: Suspension Enhancement
- Search Results: weigh safe
- Q&A: Troubleshooting Installation of Dexter E-Z Flex Suspension Kit With Shackles Hanging Down
- Q&A: Recommended Lift Kit Options for an Open Range Roamer 5th Wheel
- Shop: Trailer Hitch
- Search Results: suspension enhancement
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer suspension parts
- Shop: Gooseneck Hitch
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer leaf springs
- Article: The 5 Best Trailer Drop Hitches You Can Buy
