Replacement Speed Control Switch for 12V Fan-Tastic Vent Roof Vent

Question

Question:

What replacement speed controls are available? Mine has 0, 1, 2, 3 and is made by Intek.

asked by: Daniel V

0

Expert Reply:

If you need to replace the speed switch for the Fan-Tastic Vent Roof Vent FV801250 then you are needing part # FVK1031-05. Attached are some review videos for you to check out.

expert reply by: Jon G

0

Answer 1

I sure can BJ. To add a keyless entry lock to your 2025 Airstream, I recommend the Bauer NE RV Entry Door Lock for Trailers item #BA33UR for a left handed lock or item #BA53UR for a right handed lock. These locks have Bluetooth capability and a PIN…

view full answer...

Answer 2

Yes, we do sell a replacement switch for the Fan-Tastic roof vent. The 3-Speed Switch for Fan-Tastic Vent Roof Vent item #FVK1031-05 replaces the 3-way switch in your vent.

view full answer...

Answer 3

If you for sure used a 3 speed switch like the #FVK1031-05 as a replacement switch it would appear that the wiring of the switch might be messed up. I'd check that to see if that allows the different speeds to function again. I attached a diagram…

view full answer...

Answer 4

I will be happy to tell you the functions of the terminals on the back of Replacement 3-Speed Switch for Fan-Tastic Vent Roof Vent Item #FVK1031-05. The one labeled B is for battery power in. The terminal labeled C is the connection to the circuit…

view full answer...

Answer 5

For the Replacement 3-Speed Switch for Fan-Tastic Vent Roof Vent, part #FVK1031-05, the left terminal (B) is for the battery, the upper right (C) is for the circuit board, and the lower right (M) is for the motor. Refer to the picture below. The…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 9

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 10

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 11

Hello Justin, Welcome to etrailer! I'm glad you found us. It sounds like you're working on a trailer with a 3,500 lb axle, you can check your axle tag to confirm. If that's the case, the replacement grease seal with part number #58846 is…

view full answer...

Answer 12

If what you have now Chad is pretty flat at 26 inches then the best replacement size would be 25-1/4 inches like you mentioned. Since you wanted to increase the capacity you would want the part #e57SR which is for 4k trailer axles.

view full answer...

Replacement Speed Control Switch for 12V Fan-Tastic Vent Roof Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching