Steering Stabilizer for 2020 Fleetwood Bounder 35K Motorhome on Ford F-53 Chassis

Question

Question:

Hello, we have a 2020 Fleetwood Bounder 35K and would like to order the Roadmaster RSSA Reflex.... what exactly do we order to get the correct part and installation brackets... thank you In advance!

asked by: Jason L

0

Expert Reply:

The 2020 Fleetwood Bounder 35K is on a Ford F-53 Chassis and the correct stabilizer is the Roadmaster Exact Center Steering Stabilizer # RM42RR.

You made a nice choice as the stabilizer will provide dramatic improvements to the motorhome's steering. It comes with everything needed for installation (except for tools).

expert reply by: Conner L

0

Answer 1

Since the U-bolts on your 2019 Forest River Georgetown GT5 motorhome have 1-1/2" exposed thread, it is very unlikely you will need the longer 15-7/8" square U-bolts #RM-590050-00 or 20-1/4" long round U-Bolts #RM-590050-10 to install…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 5

Got ya Mark, thanks for reaching out! The Roadmaster Reflex Steering Stabilizer for Class A Motorhomes is the correct part for the Horizon but there two parts, the steering stabilizer itself #RM-RSSA and a vehicle specific mounting bracket kit. So…

view full answer...

Answer 6

Hi Uwe! Yes, the SnapPad StakPad Universal Leveling Block and Jack Pad #SN24VR can hold that weight. These have a capacity of 40,000 lbs, so as absurd as it may seem a single jack pad can handle the entire weight of your Class A. Using these under…

view full answer...

Answer 7

Hello Amos, thanks for reaching out. Yes the folded depth of the Kwikee Electric RV Step Complete Assembly #LC372261 is approximately 18". So when you’re checking clearance under the coach, you want to plan for about 18 inches sticking back from…

view full answer...

Answer 8

Hi Debbie! We do change part numbers when they are too close to other part numbers we have, and that looks to be the case here. The Safe-T-Plus Steering Stabilizer - White #ST49VR is the same thing as the Safe-T-Plus 41-180 and the Safe-T-Plus…

view full answer...

Answer 9

Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…

view full answer...

Answer 10

Hey Dan, welcome back! I'm assuming this is for the same 2025 you asked about before. The Safe-T-Plus Steering Stabilizer #ST98MR is what you need. This is designed to fit a Class C E-450 and comes with the custom mounting brackets. How are you…

view full answer...

Answer 11

Hey Robert, we do have steering stabilizers that fit your 2022 Thor Chateau M25 350. We have the Roadmaster Exact Center part #RM47MR and the Safe-T Plus part #ST98MR which will both work great. Neither is a bad option but I really like the Safe-T…

view full answer...

Steering Stabilizer for 2020 Fleetwood Bounder 35K Motorhome on Ford F-53 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching