What Length Crossbars Do I Need to Carry the Thule Hullavator Pro on a 2020 Subaru Forester

Question

Question:

What length Malone Airflow 2 bars would I need to use with a Thule Hullivator on a 2020 Subaru Forester w/ raised bars? Thank you.

asked by: Nathan G

0

Expert Reply:

The Thule Hullavator Pro # TH898 requires at least 28.5" of usable bar space, and between 4"-8" of those need to be outside of the mounting feet of the roof rack. For this reason I recommend going with the 58" long bars on the # MPG216, which has aero style crossbars that will accept the Hullavator Pro and provide you with plenty of bar space to carry your kayak.

I've linked some installation and informational videos on these two products for you to have a look at as well.

expert reply by: Erik B

0

Answer 1

There are two ways to connect the Thule Hullavator to your crossbars, clamp on or use the T-slot. Clamp on requires square bars and T-Track requires a Thule Crossbar. If you have raised side rails on your vehicle, the SteelTop #MPG203 will just clamp…

view full answer...

Answer 2

All you need is to get at least 4 to 8 inches of overhang on the side you're planning on putting the hullavator #TH898. That being said, you can offset the Airflow 2 #MPG217 to one side to get that overhang at least on one side. I recommend doing…

view full answer...

Answer 3

Yes, that is correct the Thule Hullavator Pro item #TH898 does indeed work with the 58 "Malone AirFlow2 Roof Rack item #MPG216. These mount to the raised rails on the 2016 Chevy Equinox and will give you plenty of room to use the lift assist…

view full answer...

Answer 4

The Thule Hullavator part #TH898 is an assisted-load kayak carrier that allows you to load the kayak at a lower height and then push the carrier and kayak up onto the roof. It's a great solution, but you need to have an aftermarket roof rack…

view full answer...

Answer 5

The Thule Hullavator Pro Kayak Carrier #TH898 has the ability to mount in crossbar channels, but it doesn't come with T-bolts. What you do is use the included hardware which allows you to do so, and you can see this starting on page 7 of the…

view full answer...

Answer 6

A longer roof rack for your 2011 Toyota Sienna like the Malone AirFlow2 part #MPG216 would be a really great option with the Thule Hullavator part #TH898 since it likes more overhang past the feet of the rack. Ideally you have 4 to 8 inches of…

view full answer...

Answer 7

I do have some options for you but the Thule Hullavator Pro Kayak Carrier part #TH898 won't work with the factory roof rack on your 2006 Toyota Sienna because the mounting feet do not have the 4" of overhang that is required for the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 11

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 12

Hey John, we'd be glad to help you pick out the best lift assisted kayak carrier for your 2026 Subaru Outback Wagon! I think the Thule Hullavator part #TH898 would be your best option as it is a little easier to use and load so that's what I…

view full answer...