How To Use NSA Ready Brute Tow Bar with Roadmaster Direct-Connect Base Plate Kit

Question

Question:

I am looking at the base plate #1427-3. I am getting clevis attachments so I can use the NSA ready brute tow bar. I just need to know what size the pin holes are at the end of the base plate arm where you attach the tow bar.

asked by: Richard E

0

Expert Reply:

In order to use an NSA Ready Brute Tow Bar with a Roadmaster Direct-Connect Base Plate Kit, you need the Roadmaster Clevis Connectors part 857768004296 which have 3/4" pins.

I have attached a list of other parts you will need below as well for a 2005 Jeep Grand Cherokee.

Roadmaster Direct-Connect Base Plate Kit part # 1427-3
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267
RoadMaster 68" Single Hook, Coiled Safety Cables part # RM-643
Roadmaster Brake-Lite Relay Kit for Towed Vehicles part # RM-88400

expert reply by: Conner L

0

Answer 1

I did some checking on whether your 2007 Jeep Grand Cherokee Laredo can be flat towed and if the vehicle has the Quadra Track II or Quadra Drive II 4WD it can be flat towed. But if you have the Quadra Trac I it cannot be flat towed. How you'll…

view full answer...

Answer 2

The first thing to do when you're wanting to flat tow a vehicle is to check the owner's manual to ensure that your vehicle is capable of being flat towed and following any steps it lists to be ready to flat tow. The equipment you need to flat…

view full answer...

Answer 3

Hey, Bill. If you’re not installing a supplemental braking system, like part #DM86VR, then the answer is no, you won’t need to install a charge line kit (part #RM-156-25). You will, however, want to double-check your owner’s manual for the exact…

view full answer...

Answer 4

Hi Milo, We don't currently offer a front bumper and winch for your 2022 Jeep Wrangler but I can say that what you're going to need to look for is how the new bumper would mount to the frame rails. The etrailer Invisible Base Plate Kit…

view full answer...

Answer 5

For your 2008 Jeep Commander, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, part #HM56205 is what you are looking for. This harness easily plugs into your vehicle's existing wiring, located behind your Jeep's tail light…

view full answer...

Answer 6

Hey Brian, since you have a Roadmaster tow bar the correct base plate kit you'd need is the part #RM-521453-5. Then for wiring you'd want the Roadmaster diode kit part #RM-15267 and you'd have everything cover since you already have…

view full answer...

Answer 7

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 8

Hello Lou, The Curt Custom Base Plate Kit - Removable Arms #C48FR will be an excellent fit for your 2014 Honda CR-V, but you will also need the Ready Brute Elite Tow Bar Adapter Brackets for Blue Ox Base Plates #BX88297 to use your Ready Brute tow…

view full answer...

Answer 9

Thanks for reaching out, Randall! The correct replacement bearing kit for your 3,500 lb Axle Technology BD3545 axle is the #84 Spindle Hub Bearing Kit #BK2-100. This comes with the following parts: - Inner Bearing #L68149 - Outer Bearing #L44649 -…

view full answer...

How To Use NSA Ready Brute Tow Bar with Roadmaster Direct-Connect Base Plate Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching