Will the Reese Goose Box Work On a Arctic Wolf 3660 with BAL NXG Frame

Question

Question:

I am trying to find out if the Reese goose box can be used on a BAL NXG frame. I like the goose box option and want to switch my 20 Arctic Wolf 3660 suite over but it has a BAL frame. Will this work? Thanks.

asked by: Jeff E

0

Expert Reply:

The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapters are not specific to any one trailer frame manufacturer. The Reese Goose Box part # RP85FR in particular will fit any frame with the 0719, 1621 and 1621HD bolt pattern and the Reese Goose Box part # RP94716-61301 will fit any frame with the 0115, 1116 and 1716 bolt pattern. The 0115, 1116, 1716, 0719, 1621 and 1621HD bolt patterns are industry standards and again not specific to any one trailer frame manufacturer. In order to determine compatibility you simply need to find the pin box model number on your trailer and match that to the above.

If you don't have a pin box model number listed above then we do still have fifth wheel to gooseneck adapters that will work for you in the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G or part # CAB-C5GX1216. The Convert-A-Ball Adapter like the Reese Goose Box will allow you to tow a fifth wheel trailer with a gooseneck hitch so you can hook-up and disconnect very easily and they both have built-in cushioning as well so the ride will be improved.

expert reply by: Conner L

0

Answer 1

Hey thanks for reaching out, Craig. We do not have any information stating that the Curt Crosswing cannot be used with the Curt Helux pin box, but if Curt specifically told you not to, then I would have to take their word for it. So unless you can…

view full answer...

Answer 2

Yes, the Curt CrossWing Lightweight 5th Wheel Trailer Hitch item #C92DR is compatible with a Rhino Pin Box. This 5th wheel hitch attaches to a standard 2-5/16" diameter gooseball. Since you have the OEM prep package, I recommend using the Curt…

view full answer...

Answer 3

Thanks for the picture and all of the information! Those dimensions do not match up to a leaf spring we currently have but I do have a close option which I think will work. When leaf springs are measured for replacement we ask people to jack the…

view full answer...

Answer 4

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 5

Hey Brian, based on the GVWR of your trailer and the current pin box the correct Reese Goose Box would be the part #RP94716.

view full answer...

Answer 6

Thanks for the picture and congrats on the new trailer! There is only one replacement option for the Turning Point Pin Box and it is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. Reese doesn't have one. The Gen-Y…

view full answer...

Answer 7

I am certain that they meant 1621 which is by far the most common pin box number used today. And I have also never seen or heard of a 1622 so I would double check with the dealer to be certain. For the 1621 if the gross trailer weight is under 20,000…

view full answer...

Answer 8

The Curt Crosswig part #C32DR locates the king pin of the trailer pin box centered between the two fifth wheel rails so you would not have to worry about tailgate or bed rail clearance issues. This hitch has a lot fewer moving parts than the Andersen…

view full answer...

Answer 9

Hello Greg. I do have a potential solution for you, but the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter #CAB-C5G that you were looking at will not work for this purpose. Reason being that this kind of adapter is not compatible with a…

view full answer...

Answer 10

I can tell you how to determine which Reese Goose Box will work for your Arctic Wolf trailer, though the RSPB83-1622 seems to be an OEM part that came with the trailer so there isn't a conversion chart I can use to determine what model pin box it…

view full answer...

Answer 11

The correct replacement manual override handle for a Lippert tongue jack is the Lippert Electric Trailer Jack with Footplate part #LC285324. If the photo you have attached is of the jack you need a handle for then it will work though I am a bit…

view full answer...

Answer 12

Hey David, great questions! I'll answer them in the same order you asked them: 1 - There isn't an official name for those brackets that I know of. They are part of the trailer frame so I guess technically they are pin box frame brackets, but…

view full answer...

Will the Reese Goose Box Work On a Arctic Wolf 3660 with BAL NXG Frame

Products Featured in This Question

Continue Researching