Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Complete your Insight observation system with this 7" LCD display with suction cup mount. Turn it on to automatically pair with your existing OneControl Insight backup camera. Built-in speaker lets you hear commands from the rear of your RV.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today we're gonna take a look at this Lippert OneControl inside camera LCD display kit. Did your RV already come equipped with an inside camera powered by OneControl If so, with this 7-inch LCD display and suction cup mount, you can complete your Insight observation system to show what is behind your RV while backing up or just traveling down the road. You simply turn this on to automatically pair with your Insight observation camera via Bluetooth. The configurable rear assist marker lines are going to show real-time distance from objects and the crisp color image can help you avoid hazards. This 7-inch touch screen has an anti-glare and anti-scratch coating. And the built-in speaker is going to project audio sent from the camera that's mounted at the rear of your RV, so that's going to be helpful and that you can hear commands from the rear of your RV from a family member or friend when you are backing this up.
So not only can you see while you're backing up your RV, but if you have a friend or a family member letting you know what direction is safe to go, you can hear those commands coming from behind your RV. Now this suction cup mount can be applied to your dash or to your windshield, and it's going to also allow for easy storage when not in use. And this mount protrudes, when it's fully extended, about 5 inches altogether from the base, from where it's going to be mounted to. And this also includes a USB cable that is going to allow you to send power to your display. And I'm gonna go ahead and just pull up my ruler here real quick and give you some overall measurements.
The overall length, we're sitting real close to 6 3/4 inches long and the height, we are sitting right at about 4 1/8 inches tall. And then just adding the height of that antenna, if you have the antenna sitting straight up from the base, that antenna is about 2 7/8 inches from the top of the display, rather, from the top of the display and this antenna can be folded down. And then the overall thickness of this unit, we're sitting pretty close, I'm taking into consideration where the connection point is for the mount, where that sticks out just a little bit. Overall, we're sitting at about 7/8 of an inch thick, and the operating temperature range is gonna be negative 4 degrees Fahrenheit to 156 degrees Fahrenheit. And the storage temperature range is gonna be negative 22 degrees Fahrenheit to 176 degrees Fahrenheit.
Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
Kevin L.
4/21/2025
Still working great and would highly recommend. The picture on the monitor is very clear and the picture does not fade away due to poor antenna reception like your competitors camera.
Don
2/21/2024
After using the monitor for a year, Id change my review from 4 stars to 2 stars. The display itself is crisp and clear. Its reasonably good for backing into a campsite. Unfortunately, its terrible as an observation system. The -outs still occur although not as frequently. The latency is terrible - when used as an observation camera, another vehicle will show up on the display somewhere far behind you then suddenly its right next to the drivers window. I only purchased the display because the manufacturer had installed the camera at the factory. Given a choice, Id rip the camera off and replace the entire system with a better system. I am still very happy with etrailer. Their service is excellent and they do have great customer service.
Mike L.
2/21/2024
Jenny N.
6/5/2023
I reached out to the manufacturer and found that beyond step one in the manual, the running lights will need to manually placed in the on position and not AUTO for the camera to be powered. I know I have my lights on AUTO and would forget this. You are correct in that this reminder is not in the manual.
Jenny N.
8/30/2023
I reached out to the manufacturer and they would like to troubleshoot with you directly. They will be in contact with you.
Henry
5/22/2025
Still working great.
Jenny N.
7/27/2022
We do ship the cameras as new camera systems and so I am unsure as to what may have happened. I will send this feedback to our manufacturer and have our customer service team reach out to you.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/20/2024
The online manual is the one to go by. Go with 15 seconds.