Trouble Removing Front Bumper Fascia On a 2019 Jeep Cherokee

Question

Question:

Hi, Ok - just attempted to do this. Hit a major road block with the facia removal. I looked at the video several times. Clearly you edited something out. It does not just pop off as you showed. What was used to pry things apart? Also - there seemed to be a set of star bolts on the front of the facia that you did not note.

asked by: Neil V

0

Expert Reply:

It can be difficult to remove the front bumper fascia on any given vehicle and the 2019 Jeep Cherokee is no exception. If you take a look at the attached video on the Roadmaster Direct-Connect Base Plate Kit part # RM-521451-5 you will see that if you use a trim panel tool between the headlight and bumper fascia that will then help removing the fascia while you are pulling away at the wheel well.

Please note, the process can vary slightly depending on which trim package you have as well as the location/type of fasteners used so please be sure to pay attention to any special notes in the install instructions that are trim level specific.

expert reply by: Conner L

0

Answer 1

Hey Riasat! Yes, the Taskmaster 5.30R12 Radial Trailer Tire w/ 12" Vesper Silver Mod Wheel #TA69QR will fit the Easy Grease Trailer Idler Hub Assembly #AKIHUB-440-2-G-EZ-1K. The hub and wheel both have a 4 on 4 bolt pattern, and the hub works…

view full answer...

Answer 2

Hey James! Congrats on your new purchase! To flat tow your 2022 Jeep Cherokee Trailhawk you will need the following parts: Base Plate Kit - Blue Ox Base Plate Kit item #BX1143. This is designed specifically for the Trailhawk models and will work…

view full answer...

Answer 3

Hey Ed, yes we do have replacement arms for Roadmaster base plate kits with the part #RM-ARMS. These arms are not interchangeable with other manufacturers. They actually aren't even interchangeable with the same manufacturer (if it's…

view full answer...

Answer 4

I'd set aside a few hours to install the etrailer Invisible Base Plate Kit #e98951 on a 2021 Jeep Cherokee as it does require removing the front fascia. The install itself is not overly difficult though. I attached a link to an install video for…

view full answer...

Answer 5

Hey Dan, For a 2022 Jeep Cherokee Trailhawk you would need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights #RM63MR. Your vehicle should be equipped with ParkSense proximity sensors and would have variable…

view full answer...

Answer 6

Congrats on the new purchase! Sorry to have to tell you but conventional brake controllers like the Redarc item #RED24FR do not work with the D- Cellorometer Unified brake system. We do not offer any replacement parts for Unified systems and it does…

view full answer...

Answer 7

The only difference between the Roadmaster Direct-Connect Base Plate Kits like part #RM-523179-5 and the Roadmaster Crossbar-Style Base Plate Kits like part #RM-523179-4 are the removable arms. The Direct-Connect style means you can attach a tow bar…

view full answer...

Trouble Removing Front Bumper Fascia On a 2019 Jeep Cherokee

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching