Replacement Inno Tire Hold 2 Rack Key That Says 262

Question

Question:

I have a inno Tire hold 2 and I lost the key to my rack. The lock says T262 can i replace it?

asked by: Lisa

0

Expert Reply:

The replacement key that you need for the Inno Tire Hold 2 part # INH120 lock is the Replacement Key for Inno Roof Racks, Bike Racks, and Cargo Boxes part # IN44FR which replaces the T262 key.

expert reply by: Heather A

0

Answer 1

The Inno Tire Hold 4 Bike Platform Rack part #INH142 comes with locks for both the hitch and bikes. The hand knob on the front of the rack which is used to tighten and loosen it has a lock core built in that won't let you loosen it, which is…

view full answer...

Answer 2

In order to find the correct replacement key for your Inno Aero Light 3 Bike Rack INH303, which is no longer available, you will need to find the lock number, which should be on the face of the lock. This should start with a "T" and will be…

view full answer...

Answer 3

We have the key you are looking for with the part #IN44FR. This is the Inno key number T262.

view full answer...

Answer 4

Does the lock core have a number stamped on it? It should have a number stamped on it like T276 which would mean you'd need key number #IN84FR as a replacement. Let me know what number you have if you have something different or you can check out…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Replacement Inno Tire Hold 2 Rack Key That Says 262

Products Featured in This Question

Continue Researching