Does Front Hitch # 65022 Fit with Transmission Cooler of 2000 Ford Super Duty

Question

Question:

My truck has a transmission cooler located behind the bumper. Is there enough space to mount this hitch?

asked by: Doug H

1

Helpful Expert Reply:

I attached a picture that shows the Draw Tite front hitch part # 65022 installed on a 2000 Ford Super Duty just like yours and you can see the transmission cooler in the picture as well which means the two will easily fit together!

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Curt Front Mount Trailer Hitch Receiver #C31014 is the only front receiver that we currently offer for your 2001 Ford F-350 that does not require you to remove the front bumper. For it to mount your F-350 must have the blocker beam on the front.…

view full answer...

Answer 2

Not all of the 2000's F-250's have the blocker beam. If your front end has the blocker beam behind the front bumper and the leaf springs mounted on the inside of the frame rails then you would use the Curt Front Mount Trailer Hitch Receiver,…

view full answer...

Answer 3

For your 2003 Ford F-350 Cab and Chassis (or Crew Cab) the Draw Tite hitch part #65022 is a confirmed fit. It installs in the middle of the bumper. If you check out the picture I attached you will see exactly where it installs.

view full answer...

Answer 4

I'd be happy to. As you can see from the cutout I added from the instructions, the leaf spring brackets from the Curt #C31014 are necessary in order to install this front-mounted hitch on your 2002 Ford Super Duty if it has a blocker bar. You can…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hello David, Thanks so much for reaching out! For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH54QR. This is the only front mount option we offer that is confirmed…

view full answer...

Answer 9

Hey Steve, we have the EcoHitch front hitch part #EH54QR as a confirmed fit for your 2025 Ford F-350 dually.

view full answer...

Answer 10

Thanks for reaching out Kevin, happy to help! I checked the specs for the 2025 Brinkley Z3100 and it has 7,000 lb tandem axles and 17.5" wheels. The DeeMaxx Disc Brake Kit w/ Actuator #DE57NR is designed for tandem 7,000 lb axles with an 8 on…

view full answer...

Answer 11

Hey Jim, the Kodiak Disc Brake Caliper #KDBC225DAC is designed so that it can be used on either side of a trailer axle so there isn't a specific left and right. This also can be used to replace a Reliable CR1000 and CL1000 so it will work for you…

view full answer...

Does Front Hitch # 65022 Fit with Transmission Cooler of 2000 Ford Super Duty

Continue Researching