What is the Overall Diameter of the Replacement Air Spring for Air Lift LoadLifter 7500 XL

Question

Question:

Can you tell me the overall diameter of this air spring?

asked by: JOEL

0

Expert Reply:

I reached out to my contact at AirLift and they were able to tell me that the mounting diameter of the Replacement Air Spring for AirLift 7500XL # AL50236 is 8" wide- so you will need at least 8" of lateral clearance in order to safely mount these air springs on your vehicle. The mounting holes on the bases of the springs are 2.75" apart (center on center).

I've attached a photo with these measurements for you as well. If you put your vehicle information into our fit guide, you can find which springs will work on your specific vehicle.

expert reply by: Erik B

0

click to enlarge

Answer 1

I have a solution for you, but the differences between the AirLift 5000 #AL89295 and AirLift 7500 #AL57595 extend to the brackets and mounting hardware. For that reason you won't just be able to swap out your 5000 air bags with the Replacement…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 6

The internal jounce bumper of the Air Lift air bag kits like the part #AL88289 is only about half the height of the air bag so it's not going to affect ride quality at all unlike the Timbrens. The Air Lift jounce bumper is mainly for in the…

view full answer...

Answer 7

In regards to the Air Lift LoadLifter Air Helper Springs, the XL or 7500 kits use larger air bags as well as thicker brackets in order to obtain higher capacities. Therefore, you wouldn't be able to simply switch out the air bags on the part…

view full answer...

Answer 8

Hey Don! The Pacbrake Alpha HD #PB32ZV you were looking at does not have the internal jounce bumper. You would need the Pacbrake Alpha HD Pro Air Bag Suspension w/ Internal Jounce Bumpers #PB92ZV. The jounce bumper adds additional support when…

view full answer...

Answer 9

The Firestone air bags do not have the jounce bumper that the Air Lift kits have. You want to always keep a minimum of 5 psi in the bags at all times, but at that minimum air pressure you still could bottom the suspension out in theory with enough…

view full answer...

Answer 10

Great question, Brady! The jounce bumper inside the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88289 is basically there so that in the unlikely event that the air bags give out, your truck still has the jounce bumper to fall back on. So…

view full answer...

What is the Overall Diameter of the Replacement Air Spring for Air Lift LoadLifter 7500 XL

Product Page this Question was Asked From

Continue Researching