Which Hubs Do I Need For 2,200 lb Timbren Axle-Less Trailer Suspension System
Published 12/11/2019
Products Featured in This Question
Question:
Wondering if this Dexter hub DX98XR will work this Timbren Axle-less setup ASR1THDS01. If so, will it allow the use of 15inch wheels with larger off-road tires sizes such as 33inch or 35?
asked by: Josh W
Expert Reply:
Yes the Timbren Axle-Less Trailer Suspension System # ASR1THDS01 will work with Dexter Trailer Idler Hub Assembly # 84545UC1-EZ.
The idler hub can mount a 15" wheel, and has a 5 on 4 1/2" bolt pattern for the lugs which are 1/2" in diameter. So if your wheels are 15", have the same bolt pattern and diameter lug nuts it will definitely work. As far as the height of the tire, it will only effect fitment if there is a fender or other piece of trailer in the way.
If you want trailer brakes, then I recommend the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles # AKHD-545-35-EZ-K along with self adjusting brake assemblies # AKEBRK-35-SA.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Bearing Buddy Fits The AKHD-545-35-EZ-K Hub?
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: Complete Breakdown of the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Q&A: 2006 Yacht Club Boat Trailer Hub Replacement Recommendation
- Q&A: Replacement Hub and Brake Assemblies for 3,500 Pound Trailer Axle
- Q&A: Replacement Trailer Hubs Using L68149 and L44649 Bearings
- Q&A: How to Grease a Dexter EZ Lube Axle
- Q&A: Can You Swap Easy Grease Caps onto the Trailer Hub and Drum Assembly - 3,500 lb Axles - 10"
- Q&A: Looking for Grease Cap With OD Slightly Larger than 1.98 Inches
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased